KUMIO ICE-1032 Ice Cream Maker Instruction Manual
- June 15, 2024
- KUMIO
Table of Contents
KUMIO ICE-1032 Ice Cream Maker
PLEASE READ INSTRUCTIONS CAREFULLY BEFORE ASSEMBLY RETAIN THIS MANUAL FOR FUTURE REFERENCE
SAFETY INSTRUCTIONS
- Read all the safety and operating instructions carefully and retain them for future reference.
- Ensure the voltage is compliant with the voltage range stated on the rating label, and ensure the earthing of the socket is in good condition.
- If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
- Do not upend this product or incline it over a 45 ° angle.
- To protect against risk of electric shock, do not pour water on cord, plug and ventilation, immerse the appliance in water or any other liquid.
- Unplug the appliance after using or before cleaning.
- Keep the appliance 8cm from other objects to ensure the good heat releasing.
- Do not use the accessories which are not recommended by Manufacturer.
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. Children should be supervised to ensure that they do not play with the appliance.
- Do not use the appliance close by flames, hot plates or stoves.
- Do not switch on the power button frequently (ensure 5 min. interval at least) to avoid the damage of compressor.
- Metal sheet or other electric objects are not allowed to be inserted into the appliance to avoid fire and short circuit.
- When take out the ice cream, do not knock the barrel or edge of barrel to protect the barrel from damage.
- Do not switch on the power before install well the barrel or blender blade.
- The initial temperature of the ingredients is 25 ± 5 ‘C .Do not put the ingredients into freezer for pre-freeze, as it will easily make the blender blade blocked before the ice cream is in good condition.
- Do not remove the blender blade when the appliance is on working.
- Do not use outdoors. Never clean with scouring powders or hard implements.
- Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
This appliance is intended to be used in household and similar applications. Only use this appliance with ingredients appropriate for making ice cream and frozen yogurt. These include base ingredients such as cream, milk, yogurt and sugar, and additional ingredients like chocolate chips, melted chocolate, chopped nuts or small pieces of fruit. Caution: Risk of fire! This appliance contains the coolant isobutane (R600a),a natural gas which is environmentally friendly. Although it is flammable, it does not damage the ozone layer and does not increase the greenhouse effect. The use of this coolant has, however, led to a slight increase in the noise level of the appliance. In addition to the noise of the compressor, you might be able to hear the coolant flowing around the system. This is unavoidable, and does not have any adverse effect on the performance of the appliance. Care must be taken during the transportation and setting up of the appliance that no parts of the cooling system are damaged. Leaking coolant can damage the eyes.
PRODUCT DESCRIPTION
CONTROL PANEL
POWER
MENU
START/PAUSE
POWER: Plug in the power supply, press the power button to tum on the machine, the indicator light of ice cream mode flashes, and press the power button again to shut down the machine.
MENU: By pressing this button, there are 3 working modes for option, including: Nixing ONLY, COOLING ONLY ,ICE CREAM.
- Mixing mode: The appliance stirs for 30 minutes without chilling.
- Cooling mode: The appliance chills forl0 minutes without stirring.
- Ice cream mode: The compressor, mixing motor and cooling fan are started, when the ice cream is finished, there will be 10 short beeps.
START/PAUSE: After setting the menu, press this button to start the working mode. During operation, by pressing this button, the working mode and time countdown will be paused. If press this button again, the machine will go on the working mode.
PRODUCING ICE CREAM
BEFORE FIRST USE
Cleanness: Before use, thoroughly wash all parts that will come into contact with the ice cream. Warning: Please be sure the power cord is unplugged. Important: Always place the Ice Cream Maker upright on a flat surface in order that the build-in COMPRESSOR can provide best performance.
-
Prepare recipe ingredients from your own recipe or from the recipe provided, and pour the well prepared recipe ingredients into the removable bowl.
J 1 Important Hint on the Volume of the Ingredients:
To avoid overflow and waste, please make sure that the ingredients do not exceed 60% of capacity of the removable bowl (Ice cream expands when being formed). -
Place the removable ice cream container into the corresponding recess in the compressor housing.
-
Place the lid motor into the transparent lid, making sure it engages and sits securely.
-
Place the stirring rod into the opening on the underside of the lid until it is sitting securely.
-
Place the lid on the ice cream container and turn it clockwise as far as it will go to make sure it is firmly attached ..
Note: the triangle mark on fue components rotates to fue “LOCK” mark. -
Press the [POWER] button to make the machine electrified. Press the [MENU] button to choose the working mode: 1 codling only 2 mixing only 3 ice cream.
-
Press the [START/PAUSE] button to stai.1 the operation.
NOTE: You can pause the operation anytime by pressing the start/pause button. Continue the operation by pressing the button again. -
When the operation 1s finished, an acoustic signal will sound.
Disconnect the power plug from the socket outlet. Turn the transparent lid and motor components anticlockwise to take out the lid the take out the ice cream container.
Note: Condensation may form on the outside of the ice cream container and freeze while the device is operating. This may make it more difficult to remove the ice cream container from the device. In this case, wait a little while before removing the ice cream container. -
Take the ice cream out of fuel container with the provided ice cream scoop or with a wooden or plastic spoon. Do not use metal utensils in the container to avoid damaging it.
KEEP COOL FUNCTION
When the ice-cream making is finished, an acoustic signal sounds. If the ice cream is not removed, the continuous chilling function starts for 1 hour. Once the continuous chilling function is complete, another acoustic signal will sound.
MOTOR SELF-PROTECTION FUNCTION
When the ice cream becomes harder, the mixing motor might be blocked. Then the motor protection device makes the mixing motor stop working by detecting its temperature to ensure the life of the motor.
CLEANING AND CARE
The appliance should be cleaned and dried after each use as follows. Lack of or improper care can impair the functionality of the appliance.
- Never clean the appliance using running water or other liquids. The motor and the compressor in particular must not come into contact with water.
- Refrain from using scratching or abrasive cleaning agents.
- Wipe down the housing of the ice cream machine with a damp cloth. Use a little detergent if necessary.
- Clean the rest of the accessories with clear, warm water and detergent.
- Allow all parts to dry completely or dry them before they are assembled or stored away.
- Store the device horizontally in a cool, dry place which is out of the reach of children and animals.
NOTE: The device and accessories are not dishwasher-safe.
The device meets the requirements of Regulation 2014/35/EU as well as the
applicable standards EN 60335-2-24:2010 +
A1: 2019 + A2:2019 ,EN 60335-1:2012 + All:2014 +
A13: 2017 + Al :2019 + Al4:2019 + A2:2019 ,EN 62233:2008
Manufacturer:
The device meets the requirements of Regulation 2014/35/EU as well as the
applicable standards EN 60335-2-24:2010 +
A1:2019 + A2:2019 ,EN 60335-1:2012 + All:2014 +
A13: 2017 + Al :2019 + Al4:2019 + A2:2019 ,EN 62233:2008 Zhongshan Donlim
Wei Ii Electrical Appliances Co., Ltd.
Add.: Fusha Industrial Park, Fusha Town Zhongshan City Guangdong
Province, P. R.China
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.
TECHNICAL DATA
Model | ICE-1032 |
---|---|
MAX. Capacity | IL |
Voltage | AC 220-240V |
Power consumption | 100W |
Refrigerant | R600a/18g |
TROUBLESHOOTING
Problem | Possible cause | So lution |
---|---|---|
Appliance does not start. | Power plug is not connected to an electrical outlet | |
or not plugged in tightly. | Connect power plug to a suitable electrical |
outlet. Make sure to plug it in tightly.
After the operation is finished, the container is difficult to remove.| Drops
of water have frozen between the container and the cooling drum .| Wait until
the frozen water has molten. Then remove the container.
Ice cream is not ready yet, but mixing blade has stopped.| When the ice cream
becomes harder, the mixing blade may get stuck, causing the motor to be turned
off automatically to prevent overheating.| Remove the container, turn off the
appliance and then restart it.
Container can not be properly inserted into the cooling drum.| Improper use of
container has lead to deformation.| Purchase a new container from an
authorized vendor or service center.
When operation is started, the mixing blade severely scratches the sides of
the container or gets stuck.| Improper use of container has lead to
deformation .| Purchase a new container from an authorized vendor or service
center.
WARRANTY
Limited two-year warranty
This warranty is available to consumers only. You are a consumer if you own a kumio ice maker that was purchased at retail for personal, family or household use. Except as otherwise required under applicable law, this warranty is not available to retailers or other commercial purchasers or owners.
We warrant that your kumio ice maker will be free of defects in materials and workmanship under normal home use for 2 years from the date of original purchase. If your kumio ice maker is prove to be defective (Non Man- damaged)within the warranty period, we will offer free replacement or reimburse.
Thank you for using our products. Please contact support@kumio.net or Customer Service Online if you have any questions.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>