rutec 7990ff Vardaflex AC Work Light Instruction Manual
- June 13, 2024
- rutec
Table of Contents
rutec 7990ff Vardaflex AC Work Light
ELECTROTECHNICAL SAFETY INSTRUCTIONS
The AC Work Light is suitable for indor and outdoor use.
Risk of electric shock!
Check the AC Work Light for damage to the sheath or supply cable before each
use. If there is any damage, the product must be disposed of.
Caution!
Only connect the AC Work Light to sockets with a suitable power supply (230 V
AC) using the contour plug provided.
Only operate completely unrolled.
SCOPE OF DELIVERY
For item number 7990ff: 1 x 15 meter AC Work Light
For item number 7991ff: 1 x 25 meter AC Work Light
MARKS AND SYMBOLS
Compliant with the applicable European CE directives
RoHS mark for products that do not contain heavy metals (EC Directive 2002/95/EC)
REACH test mark for products whose chemical components are known, registered and authorised
Protection class II
Parallel connection
TECHNICAL DATA
Power supply:
230 V AC
Power:
90 W (7990ff)
150 W (7991ff)
Current strength:
0.4 A (7990ff)
0.65 A (7991ff)
Beam angle:
120°
Quantity LED:
1110 (7990ff)
1850 (7991ff)
Connection length:
maximum 25 meters per connection
Dimensions:
15,000 x 11.3 x 8 mm (7990ff)
25,000 x 11.3 x 8 mm (7991ff)
Bending diameter:
100 mm
Lifespan:
L70 B50: 50,000 h
IP class:
IP65
Ambient temperature:
-20 – +45°C
HANDLING
Unwind the AC Work Light completely from the reel.
If necessary, you can you can fix the AC Work Light in place with cable ties
or hang it from ceiling hooks, for example.
Insert the plug into a suitable socket with the appropriate supply voltage to
switch on the light.
After use, pull the plug out of the socket to switch the AC Work Light off
again.
You can then roll up the AC Work Light again using the reel and stow it away
INSTRUCTIONS
Shortening the AC Work Light is not intended and will invalidate the warranty.
Avoid stepping on the AC Work Light as this may cause damage.
Always unroll the AC Work Light completely from the reel before operation.
Failure to do so may shorten the lifespan.
DISPOSAL
Dispose of electrical and electronic equipment in an environmentally sound manner. For more information, contact your local authority.