rutec Licht 86550-V2 VARDAflex Standard IP67 Reach25 Flex.LED Strip Instructions

rutec Licht 86550-V2 VARDAflex Standard IP67 Reach25 Flex.LED Strip

Product Specifications

• Power Supply: 24 V power supply with constant output voltage
• Power: 90 W
• Current Strength: 3.75 A
• Quantity of LEDs: 1500
• Maximum Length: 25 meters per connection
• Dimensions: 25000 x 12 x 6 mm
• Bending Diameter: 120 mm
• Lifespan: L70 B50: 50,000 h
• Protection Class: III

Product Usage Instructions

Installation:

1. Switch off the voltage before installation. Ensure that the voltage cannot be accidentally switched back on.
2. Prepare the surface where you will install the LED strip.
3. If necessary, shorten the LED strip by cutting it after every six LEDs (100 mm).
4. Peel off the self-adhesive film and gently press the LED strip onto the surface, making sure not to press directly on the LEDs.
5. Connect the LED strip to the power supply.

Shortening the LED Strip:
Risk of electric shock! Always disconnect the mains plug before shortening the LED strip. To separate the strip after every six LEDs, use a micro side cutter or an optional cutter.

Disposal:
Dispose of electrical and electronic equipment in an environmentally sound manner. Contact your local authority for more information on proper disposal methods.

FAQ:

• Q: Can I connect multiple LED strips together?
  A: Yes, you can connect LED strips in parallel. Make sure to follow the installation instructions provided in the manual.

• Q: What is the lifespan of the LED strip?
  A: The LED strip has a lifespan of L70 B50: 50,000 hours.

ELECTROTECHNICAL SAFETY INSTRUCTIONS

The LED strip is only suitable for installation in dry and wet indoor rooms area.

Risk of electric shock!
Have the installation carried out by a qualified electrician. Any liability claim for LED strips that have not been installed in accordance with the European safety directives is void.

Caution

• Only connect the LED strip to a suitable  power supply (24 V DC).
• Only operate when completely unrolled.
• Connect LED strips in parallel.

SCOPE OF DELIVERY

• 1 x 25 meter LED strip
• 100 x mounting bracket made from silicone
• 4 x in-feeder cap
• 4 x end cap

MARKS AND SYMBOLS

• Compliant with the applicable european CE directives
• RoHS mark for products that do not contain heavy metals (EC Directive 2002/95/EC)
• REACH test mark for products whose chemical components are known, registered and authorised
• Protection class III
• Parallel connection:
• Suitable for through-wiring.

TECHNICAL DATA:

• Power supply:
  • 24 V power supply with constant output voltage
• Power:
  • 90 W
• Current strength:
  • 3.75 A
• Radiation angle:
  • 120°
• Quantity LED:
  • 1500
• Length:
  • maximum 25 meters per connection
• Dimensions:
  • 25000 x 12 x 6 mm
• Bending diameter:
  • 120 mm
• Lifespan:
  • L70 B50: 50.000 h

INSTALLATION

Switch off voltage prior to installation. Ensure that voltage cannot be accidentally switched on again.

First connect the LED strip to an controller, if available, and then to the power supply (not included in the scope  of delivery).

Caution!
On conducting surfaces, place an insulation layer between the LED strip and surface. Surfaces must be flat, free  of dust, grease and dry.

1. Prepare surface.
2. Shorten LED strip if necessary (fig. 1).
3. Peel off self adhesive film and gently press on LED strip, do not press directly on the LEDs.
4. Connect LED strip to power supply.

SHORTENING THE LED STRIP:

Risk of electric shock!
Always disconnect the mains plug before shortening.
LED strip can be separated in each case after six LEDs (100 mm) (fig. 1 ).

Separate the LED strip at the marked position. For a tightly assembled LED strip is a micro side cutter or an optional cutter required.

Caution!
With soldered connections note that the soldering temperature is 260° C and the soldering duration a maximum of 10 seconds per soldering point.

DISPOSAL
Dispose of electrical and electronic equipment in an environmentally sound manner. For more information, contact your local authority.

StandardIP67Reach25_86550-V2_BA_03/2024

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>