hama 200100 USB-C Docking Station Instruction Manual

: June 6, 2024
: Hama

Table of Contents

Package Contents
Safety Notes
Startup and Operation
Warranty Disclaimer
Technical Data
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

00
200100
USB-C Docking Station

Operating Instructions

|
---|---
|

Package Contents

USB-C Docking Station
These operating instructions

Safety Notes

Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
Do not open the device or continue to operate it if it becomes damaged.
Do not operate the product outside the power limits given in the specifications.
Do not modify the product in any way. Doing so voids the warranty.
Keep this product, like all electrical products, out of the reach of children! Use the product for its intended purpose only.
Protect the product from dirt, moisture, and overheating, and only use it in an adry environment.
The product is intended for indoor use only.
Do not use the product in the immediate vicinity of heaters or other heat sources or in direct sunlight.
Do not use the product in moist environments and avoid splashes.
Do not use the product in areas where the use of electronic devices is not permitted.
Do not drop the product and do not expose it to any major shocks.
Dispose of packaging material immediately according to locally applicable regulations.

Warning

Find out the maximum output current capacity of the USB port on your device. To do this, consult the operating instructions or ask the manufacturer.
Common values are500 mA for USB-A2.0, 900 mA for USB-A3.0, and up to 3000 mA for USB-C.
Ensurethat the cumulative current draw of all USB devices connected to the hub/multiport adaptor does not exceed this value.

Note

Tobeable to use the charging function, the device must support Power Delivery (PD) or Thunderbolt-3/4.
Touse the HDMI™ or DisplayPort function, the device must support DisplayPort Alternate Mode or Thunderbolt 3/4.
Support of MST(Multi-Stream Transport) is a requirement for the use of multiple monitors displaying different contents.
For MST, passive HDMI™ /DisplayPort cables (without chipset /signal converter) must be used.
The MSTfunction is dependent on the graphics card, operating system and monitor used. For more information, consult the operating instructions or contact the manufacturer.
You can find a detailed overview of the connection possibilities and maximum resolutions under various systems at www.hama.com -> 00200100 -> download

Startup and Operation

Switch on your computer and boot the system.
Connect the product to a free USB port on your computer.
You do not have to install drivers; the computer will automatically recognize the product.
If necessary, follow the instructions for your operating system.
In order to use your devices, plug them into the product one after the other.

Warranty Disclaimer

Hama GmbH &CoKGassumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product, or from failure to observe the operating instructions and/or safety notes.

Technical Data

Operating voltage /current consumption	5–20V⇌ max. 5A
Compatibility	USB-C port
System requirements	Windows 11 /10/8/7

Mac OS 10.8 ≥
USB specification| USB 3.2 Gen1

Note

If there is interference or the product no longer responds, unplug the product, wait a few seconds and then plug it in again.

Hama GmbH &CoKG
86652 Monheim /Germany
Service &S upport
www.hama.com
+499091502-0
All listed brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general terms of delivery and payment are applied.
00200100/08.21