HOSELINK L110 Round Solar Wall Light User Manual
- June 9, 2024
- HOSELINK
Table of Contents
HOSELINK L110 Round Solar Wall Light
Kit Contents
- 2x Round Solar Wall Light
- 2x Screws
- 2x Masonry Plugs
A highly decorative light that will beautify and enhance your outdoor space. We recommend grouping multiple lights with even spacing for a dramatic effect.
Lighting Modes
Once activated, the light automatically turns on at dusk and switches off at
dawn. To activate the light, turn on the switch on the back of the unit. Test
by covering the solar panel completely to check that the light comes on. The
light is now ready for use.
Product Installation
- STEP 1 Find a suitable location Solar lights need access to direct sunlight for optimum results; preferably 6-8 hours per day.
- STEP 2 Install the light
Installation – Option 1
Using adhesive outdoor tape. Adhere using Hoselink Outdoor Acrylic Double-
Sided Tape (SKU L100), sold seperately. Be sure to stick the tape onto the
stainless-steel plate on the back of the light. Installation – Option 2
Using supplied hardware.
Use a 6mm drill piece for masonry installation. Once your hole is drilled,
gently hammer the plugs into place and then secure the screws tightly. For
timber, use a 3mm drill piece without the plugs. Hang the light and enjoy. Be
sure to clean the solar panel periodically to maintain optimal performance.
Specifications
- Solar panel 2V / 0.25W
- LED Lumens 6 lumens
- Light Colour Warm
- Lithium Battery 600mAh / 1.2V
- Charge Time 8 hours
- Working Time 20 hours
- Number of Lights 1 LED per light
- Solar Panel Size 50w x 25d mm
- Water Proof Rating IP65
- Light Size 90w x 90h x 50d mm
- Materials ABS & PC
NOTE: if the light does not turn on, this could be due to the battery not being charged. Leave out in direct sunlight for 6–8 hours and try again.
For more information visit
hoselink.com.au
or call
1300 900 617
Cultivating Connections
youtube.com/hoselink
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>