HOSELINK 5641-WG Rotating 3-Arm Sprinkler with Metal Base User Manual

June 4, 2024
HOSELINK

User Manual
MODEL: 5641-WG
Rotating 3-Arm Sprinkler with Metal Base

5641-WG Rotating 3-Arm Sprinkler with Metal Base

The Rotating 3-Arm Sprinkler with Metal Base is the perfect sprinkler to water your large garden beds or lawn. The classic 3-arm design provides an even spray, showering water up to 10m in diameter. It’s also great fun for the kids to jump through on those hot summer days!

Kit contains:

  • 3-arm sprinkler head
  • Metal Base
  • Hoselink Accessory Connector

ASSEMBLY

The sprinkler will arrive assembled. If it does arrive in two parts, follow these steps to assemble:

  1. Simply screw the sprinkler head into the available thread in the center of the metal base. Make sure it’s tight to avoid leaks.
  2. Place the sprinkler in your desired location and screw in the Hoselink Accessory Connector. You can now attach the sprinkler to your Hoselink-fitted hose.

USING THE SPRINKLER

The Rotating 3-Arm Sprinkler with Metal Base will require a certain amount of pressure in order for the arms to spin and function properly. To adjust the coverage or spin of the sprinkler, simply use the tap or a Hoselink Hose End with Flow Control to increase or decrease the water pressure.
NOTE: If you do not have a Hoselink-fitted hose, you’ll need to convert to Hoselink’s fittings, or remove the Accessory Connector and use another click-on male connector.
NOTE: You can use multiple Rotating 3-Arm Sprinklers with Metal Bases using a daisy chain of hoses; however, you will require extremely high-water pressure for this to work efficiently. To do this, remove the stop cap and use a Tap to Hose Connector Set (item 2310-WG) and a Hose End Connector (item 2420-WG) to attach another length of hose that runs to a second sprinkler. We would recommend a maximum of two sprinklers running off one hose to avoid water pressure issues from occurring.

TROUBLESHOOTING

If the sprinkler head has stopped turning, check for blockages by removing the Hoselink Accessory Connector and a sprinkler head, then rinse both with warm water. Running warm water through the system with the head removed will help remove any debris caught inside. You can also remove the black stop cap to flush through the entire sprinkler.

Replacement Parts:

  • Stop cap

MODEL: 5641-WG
Rotating 3-Arm Sprinkler with Metal Base

For more information visit
hoselink.com.au
or call
1300 900 617
Cultivating Connections
Cultivating Connections
youtube.com/hoselink

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals