picun H6 Wired Bluetooth Earbuds Instructions
- June 6, 2024
- picun
Table of Contents
picun H6 Wired Bluetooth Earbuds
Free Control Functions
Easy to use the Micrnphone and activate the function of Siri,calls and music
The LED light is off during playing music.
Wireless Bluetooth Headset Instructions
Safety Matters
In order to use this product correctly and safely, please read the manual carefully before use and keep it in a safe place.
When using this product, please pay attention to the following items:
- Please control the volume and usage time of this headset correctly.
- Do not use this headset in a potentially risky environment to ensure safety.
- Do not use this headset to listen to music during the driving process, make or receive calls to avoid distractions.
- Please put earphones out of reach of children, so as to avoid danger caused by improper use of children.
- Avoid water flowing into the headphones when cleaning them, otherwise the sound quality of the headphones becomes worse or headphones will be damaged.
- Avoid increasing the volume because you cannot hear the sound around you. If tinnitus occurs or the volume is too high, adjust thesound to the appropriate volume.
- lf you feel obvious discomfort, excitement or other adverse reactions while using this headset, please stop using it immediately.
- Do not place or use this headset at temperatures below -15 degree C (-SF) or above 55 degree C (131 F). Otherwise, the service life of the headset or battery will be shortened
Disconnect the Wireless connection between the headset and mobile phone, please use any of the following methods:
- Turn off the mobile phone blue-tooth function.
- Press and hold the multifunction button on the headset until the red light is off and the headset will automatically turn off.
Re-connection of the paired headset to your mobile phone:
- Please keep the distance between wireless headset and mobile pbone (or other connection units) within Im.
- Turn on the headset and the headset enters the reconnect mode. At this time, the blue light is flickering.
- Open the Bluetooth search function in your mobile phone or devices required for other connection at the same time, and the Bluetooth headset will automatically reconnect to the last connected device (mobile phone).
Answering calls:
When you bear a warning from the headset during a call, click the
multifunction button to answer the call or use your mobile phone to answer the
call.
Rejecting calls:
When you bear a warning from the headset during a call, click the
multifunction button twice in succession, the call will be rejected, or use
your mobile phone to reject call.
Hanging up calls :
Click the headset multifunction button during a call, or use the “Hang Up”
button in your phone to hang up the call.
Voice assistant:
In the Bluetooth connection state, click the multifunction button twice
continuously to enter the voice assistance function (wake up SIRI) (to make
sure that the mobile phone has this function).
Music play/pause:
Click the multifunction button to play or pause music.
Volume adjustment and song selection:
When playing music, quick click the volume(+) / (-) to adjust the sound
volume. Press and hold for I second the volume(+) I (-) to select song.
Indicator LED light:
The LED light is off during playing music.
Headset Overview
Explanatory drawing of headset Headset package contents:
I H6 Bluetooth Earphone
I User manual
I *Charging cable
Charging and battery
- When there is low battery, the indicator light is red and flickering. Please turn off headset before charging.
- Insert USB charging cable into the headset charging interface, and insert another end of the USB charging cable into USB charger or other charging unit. At this time, the headset is charging. The red light of the headset is permanently lighted while charging.
- It takes about 2~3 hours for the headset to be fully charged. Red light will be off and blue light will be on after fully charged.
Warning:
- The headset must be charged with a matching charging cable. If you use a mismatched charging cable, it would damage the headset; DC voltage must be 5V and theelectric current must be more than 100 mA(5V/ 100mA).
- This headset has a built-in, non-removable rechargeable battery. Do not try to take out the battery from the headset to avoid damaging the headset.
Starting Up
Press and ho Id for 3 seconds the multifunction button until the blue light is on, the headset will sound “power on, pairing”.
Pairing mode:
Press and hold the multi-function button until the red and blue lights flash
alternately and the headset is waiting for pairing.
Turn off:
Press and hold for 3 seconds the multifunction button until indicator light is
off, and the headset will sound “power off
Bluetooth pairing steps
- Please keep the distance between wireless headset and mobile pbone (or other connection units) within one meter, as close as possible.
- Turn on the headset and enter the pairing mode. At this time, the red and blue lights flickering alternately.
- Turn on the Bluetooth search function of the phone or other connected device, and the phone will display “H6”.
- Select “H6”, the wireless headset will automatically connect to the phone, and the blue light will flash.
Note: The pairing time of the wireless headset is less than 20 seconds. If the light is off, the wireless pairing mode has stopped. If you have not successfully paired, please repeat steps I to 4 for pairing again
Frequently asked questions
-
Why cannot the H6 headset be paired with mobile phone?
A: Please check if the headset is in pairing or connecting mode and check if the phone’s B luetooth function has been turned on. Check the Bluetooth menu in your phone and delete/cancel the headset, then reconnect the headset according to the user manual. -
Why the H6 headset does not turn on?
A: Please check the battery power of the headset. If it is too low, it will not turn on and please charge it -
Is it possible to replace the battery of the H6 headset?
A: No, the battery of this bead set is a non-removable lithium polymer. -
Could H6 headset be used during driving?
A: The communication headset can be used while driving. However, it is not recommended to use headphones during driving. -
Could H6 headset disconnect with mobile phone within IO meters?
A: Usually the connection will not be disconnected, but it will happen. Since Bluetooth is a technology, Bluetootb technology is very sensitive to objects between headphones and connected devices. Please check whether there are metal or other object which may impact on the connect within the connection scope. -
Why is there no sound after connecting the headset to computer or mobile phone?
A: Please check if the computer (or mobile phone) output sound track is set to wireless voice frequency device, and whether the computer (mobile phone) wireless technology supports the A2DP protocol. Please check the volume of your computer/phone -
When the headset is connected to the phone, can it be used to contro I the application of the phone?
A: The software features of the applications in different devices are different, so the headset does not support certain application features.
Technical Specification
| Product Name: | H6 |
|---|---|
| Bluetooth Version: | Bluetooth 5.0 |
| Transmission Radius: | 10 meters |
| Battery Capacity: | 380 mAh (double battery, single 190 |
| Standby Time: | 20 days |
| Playing Music Time: | 28 hours or more (medium volume) |
| Call Time: | about 28 hours |
| Charging Time: | about 2~3 hours |
Support Protocol:
HFP/A2DP/AVRCP/SPP/AVDTP/AVCTP/SMP/ATT/GAP/ GATT /RFCOMM/SDP
Frequency Response:| 20~23000Hz
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment