HOSELINK L280 Adjustable Solar Mounted Spotlight 8LED User Manual
- June 4, 2024
- HOSELINK
Table of Contents
HOSELINK L280 Adjustable Solar Mounted Spotlight 8LED
Kit Contents
- 1x Spotlight
- 3x Screws
- 3x Plugs
LIGHTING MODE
Dim light with sensor mode (6LED) from dusk until dawn, switching to a bright light for Continuously emits a dim light 15-20 seconds when motion is detected.
Product Installation
Follow these steps to mount to a wall or fence using the supplied plugs and screw.
Find a suitable location
Solar lights need access to direct sunlight, preferably 6-8 hours per day. The motion sensor will detect movement up to 5 meters away.
Mounting the solar light
Use a drill bit for masonry installation. Once holes are drilled, gently hammer the plugs into place and secure the screws tightly. For timber, use a 3mm drill bit to drill a pilot hole. This will help guide the screws into place plastic plugs are not required.
Turn on the light
To activate the light, press the button on the back of the solar light. Test it’s working by covering the solar panel completely to check the light comes on. The light is now ready for use.
Note
If the light does not turn on, this could be due to the battery not being
sufficiently charged. Leave the light out in direct sunlight for 6-8 hours and
try again.
Specifications
Specifications
Solar panel| 5.5V / 1.22W
LED lumens| Dim – 2.5
Bright – 200
Waterproof rating| IP65
Lithium battery| 2000mAh / 3.7V
Light temperature| 6000-6500K
Charge time| 6-8 hours
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>