TRIOBIKE Boxter Electric Cargo Bikes Instruction Manual
- June 5, 2024
- TRIOBIKE
Table of Contents
TRIOBIKE Boxter Electric Cargo Bikes
HOOD INSTALLATION MANUAL
- Open the box and place the parts on a flat and clean surface.
- Apply 2 Velcro stripes on the box front, in the positions marked by the red circles.
- Take the 4 mounting brackets and mount them on the prepared positions using 2x M3.5×13 screws on each bracket.
- Take the 2 side frame tubes and insert them into the front and rear brackets pins. The big holes have to point to the outside.
- Take the 2 (2 kids hood) or 3 (4 kids hood) short straight bars and fix them to the side frame tubes with the DIN912 M4x8 screws.
- Take the 8 turn locks and mount them on the prepared positions, shown by the red circles, using 2x M3.5×13 screws on each lock.
- Take the fabric cover and put it on the frame, placed symmetrically. Close the Velcro stripes placed on the inside of the hood fabric, in the positions shown by the blue circles, around the metal frame.
- Fix the fabric cover with the turn locks, twisting them.
TRIOBIKE A/S
Vesterbrogade 149, 1620 Copenhagen V –
Denmark phone: +45 3670 0070
info@triobike.dk |
www.triobike.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>