Flydigi B6X Mobile Phone Cooling Fan User Manual

June 9, 2024
FLYDIGI

Flydigi-LOGO

Flydigi B6X Mobile Phone Cooling Fan

Flydigi-B6X-Mobile-Phone-Cooling-Fan-PRODUCT-IMG

Mount Magnetic sheet

Skip this step if there is magnetic function to your phone (iPhone 12/13/14)

  1. clean up your device before applying.
  2. Make sure that the transparent plastic sheet handle is facing the phone charging port.
  3. Attach magnetic sheet to protective film. Set it aside for 1 hour before use.Flydigi-B6X-Mobile-Phone-Cooling-Fan-FIG- \(1\)

First to use:
The default mode is the Smart Frequency Conversion mode. Notice: 5V 2A or higher charger output is required.

Power Switch:
Click can control the cooling fan on and off

Scanning QR code (left) to download Flydigi Game Center.
Turn on the Bluetooth to connect Cooling fan can change to multiple modes, view more tutorials.

Smart Frequency Conversion

Cooling fan will auto adjusts cooling power for safe use of your phone. It is recommended to use a 20W or above power charger, otherwise the maximum power cannot be activated.

Rated Output

Cooling fan will output cooling power according to the selected level. It is recommended to use a 20W or above power charger, otherwise the maximum power cannot be activated.

  • Product Name Flydigi Mobile Phone Cooling Fan B6X
  • Model Flydigi B6X
  • In the box : Cooling Fan, Type C Cable, Manual

Q & A

  • Q1: Is it necessary to pair with a charger with outpower of 20W and above?
    • A1: In order to active maximum power, we recommend to pair with.
  • Q2: Why does the Cooling fan suddenly stop working?
    • A2: When the temperature of the product is too high, the automatic protection mechanism will be triggered, which will automatically stop working. Please put it in a cool place and make sure before restarting.

Name and Concentration of Toxic or Hazardous Substances and ElementsFlydigi-
B6X-Mobile-Phone-Cooling-Fan-FIG- 4

  • This table is based on the regulations of SJ/T 11364 2014
  • Indicates that the concentration of the toxic or hazardous substance in all homogeneous materials in this part is below the limit requirement in GB/T26572 2011
  • Indicates that the concentration of the toxic or hazardous substance in at least one homogeneous material of this part exceeds the limit requirement in GB/T26572 2011
  • The environmentally friendly use period of this product is 10 years based on normal operating conditions
  • If quality problems occur within 15 days from the date of purchase, the user can contact the purchase shop for return or exchange.

Federal Communications Commission (FCC) Statement

The device has been evaluated to meet general RF exposure requirement, The device can be used in portable exposure condition without restriction Federal Communication Commission (FCC) Radiation Exposure Statement Power is so low that no RF exposure calculation is needed.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Note : The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user’s authority to operate the equipment.
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation, This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in a particular installation. lf this equipment does cause harmful interference to radio or television reception. which can be determined oy turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
  • Consult the dealer or an experienced radio/ TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals