FLYDIGI FP2 Game Controller User Manual
- June 13, 2024
- FLYDIGI
Table of Contents
Flydigi Direwolf 2
Game Controller
User Manual
FP2 Game Controller
http://data.flydigi.com/api/web/link?u=1693206714
Scan QR code o read the user manual
Connect With Computer
Wireless dongle connection
- Plug the dongle into the computer’s USB port
- Dial the back gear to
- press the button, the controller will be connected automatically, and the first indicator light keep in white
- The next time you use it, press the button once, and the controller will be connected automatically
Wired connection
Connect the computer and the controller through the USB cable, and the
Indicator light keep In white, the connection Is successful
BT connection
Turn the back mode gear to and connect the Xbox Wireless Controller to your
computer’s BT Setting
Connect to Switch
NS
- Clck the controller icon on the Swich
- 5hit the back gear o NS homepage o enter [Change gripforder]
- press the bution the contraller il be connested automaticaly. and the frstindicator lght keep in blue
- The next time you use it press the button once and th controller wil automatially connect
In Switch mode, the key and key-value mapping relationship is as follows
A| B| X| Y| SELECT| START| |
---|---|---|---|---|---|---|---
B| A| Y| X| | +| home page| Screenshot
switeh
Connect an Android/iOS device
Turn on the device’s Bluetooth.con- necto the Xbox Wireless Controller, and
the controlle indicator ight keep in whitelight s solid white
The next ime you use it press the button once and the controler wil
automatially connect
Flydigi Space Station For More Customize Setting
Visit Our official website www.flydigi.com
download “Flydigi Space You can customize buttons, macros, body feeling,
trigger Statior and other functions.
| home page
---|---
| Macro definition
| Somatosensory mapping
| Joystick adjustment
Function
Turbo
Set up turbo| Press the 0 and Target button at the same time to set the button
as a burst button
---|---
Clear turbo| Press the 0 and burst buttons at the same time to clear the burst
function
Adjust the frequency| Hold down the 0 button while pushing the left stick
left/right, Decreases/increases burst frequency
Supports buttons| ABXY, L, ZL, R, ZR, D-pad, left/right stick press down
Macro Setting
Rcorsing macro| 1. Long rss O 3nd WLz for e seconds o et th recorang mode, s
tme the mcato g o blesch
2.0parate th contrallerto ecor,prss the iz bttonsance o compete e recording
“Honiyonebuto i recorded, LMz il b mapped o that uton
---|---
Clear Marco| Pressand Hold Qnd MIM21o clean p he et of henacio/mapng
Vibration
Hold down the O button while pushing the leftstick down/up to
decteasefincrease the vibration force.
Basic operations
Power on: Press the button once
Power off: switch back gear: After § minutes of no operation, the
contraller will automatically wrn off
Low battery: The second indicator flashes red
Charging: The second indicator keep n red
Fully charged: The second indicator keep in green
Specification
mode| Applicable Platforms| Li ht| Connection method|
System requirements
---|---|---|---|---
| PC| Long press0+X to switch to Xlnput mode, the indicator is white Long
press0+A to switch to Dlnput mode, the indicator is blue| Dongle/ Wired| Win 7
and Above
| PC/Android /i0S| BT| Win 7 and Above Android 10 and Above iOS 14 and Above
NS| Switch| Blue| BT/Wired| Switch
Xinput mode: suitable or the vast majority of games that natively support
controllers
Dinput mode: For emulator games that natvely support controllers
Wireless RF: Bluetooth 5.0
Service distance: lezs than 10 meters
Battery Information: rechargeable ihium-fon batiary, battry capacty
800mAR. charging time 2 hours, charging voliage SV, charging current 500mA
Operating current: fess than 45ma when in use,less than 1044 i standby
Temperature range: 5 C – 45 “C use and storage
Appearance
Q & A Q: The controller cannot be connected? k Please make sure that the
back gear of the controller is correct, and press and hold the O, button for
three seconds at the same time, the indicator flashes quickly, and the
controller enters the pairing state – Pair the receiver: plug in the dongle
and use the pin to press the pair button to finish the pairing – Pair
Bluetooth: Unpair the device on the Bluetooth settings page, turn Bluetooth on
and off, and reconnect
Q: How to upgrade the controller firmware? A: Install the Feizhi space station
on the computer, or install the Feizhi game hall on the mobile phone, and
upgrade the firmware according to the software boot
Q: Is there an abnormality in the joystick/trigger/body feeling? k Install the
Feizhi space station on the computer, enter the test page, and press the guide
calibration controller
The name and content of harmful substances in the product
Part Name | Toxic or Hazardous Substances and Elements | |
---|---|---|
Pb | Hg | Cd |
PCB Bored | 0 | 0 |
Sheet | 0 | 0 |
Packaging | 0 | 0 |
%Wes | 0 | 0 |
Polymer battery | 0 | 0 |
Silicone | 0 | 0 |
Small structural parts sucn as metal and tape | 0 | 0 |
This form has been prepared in accordance with the provisions of SJ/T 11364
Indicates that the content of the hazardous substance in all homogeneous
materials of this part is within the limit specified in GB/T 26572-2011
Require the following st, Indicates that the content of the hazardous
substance in at least one homogeneous material of the n component exceeds the
provisions of GB/T 26572-2011 The limited requirements
FCC Statement
This device complies with Pad 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference. (2)This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note:This equipment has been tested and found to comply with the limits for a class B digital device,pursuant to Pad 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequence energy and,if not installed and used in accordance with the instructions,may cause harmful interference to radio communications.However,there is no guarantee that interference will not occur in a particular installation.if this equipmemt does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an autlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.