SUPERATV IN-RA01-003-3 Polaris Clearance Boxed Radius Arm Instruction Manual

SUPERATV IN-RA01-003-3 Polaris Clearance Boxed Radius Arm

Product Information

Specifications:

• Product Name: High Clearance Boxed Radius Arms
• Model Number: IN-RA-P-RZRXP-BX
• Manufacturer: SuperATV
• Installation Kit Contents:
  • Upper x 2
  • Lower x 2
  • Misalignment Bushing x 8
  • Bushing x 8
  • M10-1.50 x 70mm Lg. FHCS x 2
  • M10-1.50 x 80mm Lg. FHCS x 2
  • M10-1.50 Nylock Nut x 4
  • M12-1.75 x 90mm Lg. FHCS x 4
  • M12-1.75 Nylock Nut x 4

Product Usage Instructions

Installation:

• Step 1:
  Before discarding the packaging, make sure the product has been successfully installed.

• Step 2:
  Read the instructions and view the illustrations provided in the user manual before beginning the installation process.

• Step 3:
  Remove all stock hardware from the machine, including the stock RSLs (Radius Support Links) and Brace Plate from the frame (Passenger Side), and the stock RSLs from the Wheel Bearing (Driver Side).

• Step 4:
  Measure the eye-to-eye distances on the stock RSLs and transfer the dimensions to the new RSLs. If the SuperATV Lift Kit LK-P-RZR1K-3-5 is installed, set the upper stock dimension to 615mm and the lower stock dimension to the stock dimension.

• Step 5:
  Install two Misalignment Bushings into each RSL as shown in the illustrations. Use the appropriate M10 or M12 Misalignment Bushings according to the stock RSL bolt size.

• Step 6:
  Choose the appropriate installation option based on whether your machine has a SuperATV RB-P-RZR1K Rear Bumper (Install Option A) or not (Install Option B).

Install Option A:

• Step 6.1:
  If your machine has a SuperATV RB-P-RZR1K Rear Bumper, use the supplied M10 x 70mm FHCS (Flat Head Cap Screws) and M10 Nut to attach the upper part of the Radius Arms to the Wheel Bearing with the stock hardware.

• Step 6.2:
  Install the supplied Bushings into the lower part of the Radius Arms. Use the M10 x 80mm FHCS and M10 Nut to attach the lower part of the Radius Arms to the Wheel Bearing with the stock hardware.

• Install Option B:

• Step 6.1:
  If your machine does not have a SuperATV RB-P-RZR1K Rear Bumper, use the appropriate M10 or M12 hardware, Bushings, and Brace Plate to attach the upper part of the Radius Arms to the Wheel Bearing with the stock hardware.

• Step 6.2:
  Install the supplied Bushings into the lower part of the Radius Arms. Use the M10 x 80mm FHCS and M10 Nut to attach the lower part of the Radius Arms to the Wheel Bearing with the stock hardware.

• Step 7:
  Tighten all hardware completely.

Radius Arms Adjustment:
If the Wheels and Axles do not rotate freely or equally, adjust the Radius Arms out in small increments until they rotate freely. Make sure to tighten all hardware completely after adjustment.

Frequently Asked Questions (FAQ):

Q: Where can I get help with my installation?
A: If you need assistance with your installation, you can contact SuperATV through the following channels:

• Email: [email protected]
• Website: www.superatv.com
• Phone: 1-855-743-3427
• Support Hours: 8:00 am – 8:00 pm EST (Monday to Thursday), 8:00 am – 7:00 pm EST (Friday), 9:00 am – 2:00 pm EST (Saturday)

Do not discard packaging until product has been successfully installed.

Kit Contents

• M10 and M12 hardware, Bushings, and Misalignment Bushings are included with kit.
• Use stock RSL bolt to determine M10 or M12 installation.

Keep all stock hardware removed from machine

Dimensions

Measure eye-to-eye distances on stock RSLs and transfer dimensions to new RSLs.

• Install (2) Misalignment Bushings into each RSL as shown.
  • Use appropriate M10 or M12 Misalignment Bushings.

Installation

Installation: The passenger side is shown.

• If the machine has a SuperATV RB-P-RZR1K Rear Bumper use “Install Option A”.
• Machines without a Rear Bumper use “Install Option B”; see the following page.
• Repeat for the opposite side. Tighten the hardware completely.

Install Option A:

Install Option B:

Radius Arms Adjustment

• If Wheels and Axles do not rotate freely, equally adjust Radius Arms “out” in small increments.
• Tighten the hardware completely.

Liability Statement

SuperATV’s® products are designed to best fit user’s ATV/UTV under stock conditions. Adding, modifying, or fabricating any factory or aftermarket parts will void any warranty provided by SuperATV® and is not recommended. SuperATV’s® products could interfere with other aftermarket accessories. If the user has aftermarket products on the machine, contact SuperATV® to verify that they will work together.

Although SuperATV® has thousands of satisfied customers, users should be aware that installing lift kits, long travel, suspension kits, tires, etc. will change the ride of the machine and may increase maintenance and part wear. Operating any off-road machine while, or after, consuming alcohol and/or drugs increases the risk of bodily harm or death. No warranty or representation is made as to this product’s ability to protect users from severe injury or death. SuperATV® urges operators and occupants to wear a helmet and appropriate riding gear at all times.

By purchasing and installing SuperATV® products, the user agrees that should damages occur, SuperATV® will not be held responsible for loss of time, use, labor fees, replacement parts, or freight charges. SuperATV®, nor any 3rd party, will not be held responsible for any direct, indirect, incidental, special, or consequential damages that result from any product purchased from SuperATV®. The total liability of the seller to the user for all damages, losses, and causes of action, if any, shall not exceed the total purchase price paid for the product that gave rise to the claim. SuperATV® will warranty only parts provided by SuperATV®. Any damage or problems with OEM housings, bearings, seals, or other manufacturers’ products will not be covered by SuperATV®. SuperATV® parts and products are not warranted if the item was not installed properly, misused, or modified.

Installing, adding, modifying, or fabricating any factory or aftermarket product to your ATV/UTV may violate certain local, state, and federal laws. Be advised that laws vary depending on town, city, county, state, etc. Use of certain products on public streets, roads, or highways may violate law. The Buyer is solely and exclusively legally and personally responsible for any violation of the law by the installation or use of the product. You must abide by all local, state, and federal laws, including but not limited to vehicle safety, traffic laws, and ordinances. It is your responsibility to know the laws and how they apply to you. The Buyer is responsible for fully understanding the capability and limitations of his/her vehicle according to manufacturer specifications, warnings, and instructions and agrees to hold SuperATV® harmless from any damage resulting from failure to adhere to such specifications, warnings, and/or instructions. The Buyer is also responsible to obey all applicable federal, state, and local laws and ordinances when operating his/her vehicle while using this product, and the Buyer agrees to hold SuperATV® harmless from any violation thereof.

Need help with your installation?

• [email protected]
• www.superatv.com
• 1-855-743-3427
• 8:00am – 8:00pm EST M-Th 8:00am – 7:00pm EST Friday 9:00am – 2:00pm EST Saturday.

References

• SuperATV.com
• superatv.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>