Shanghai Flydigi Electronics Technology APEX2 Flydigi Apex Multi-Platform Controller Instruction Manual
- June 5, 2024
- Shanghai Flydigi Electronics Technology
Table of Contents
- Other Accessories Dual-segment detachable stand, Charging Cable, USB
- Other Accessories
- Part Instruction
- Wheel Button
- Dual-segment Detachable
- Replaceable Joystick
- Basic Operation
- Connection Instruction
- Use on mobile phone, tablet
- Use On PC
- performance parameter
- Federal Communications Commission (FCC) Statement
- Read More About This Manual & Download PDF:
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Other Accessories Dual-segment detachable stand, Charging Cable, USB
receiver, Replaceable joystick, Controller bag
Other Accessories
Dual-segment detachable stand, Charging Cable, USB receiver, Replaceable joystick, Controller bag
Part Instruction
Dismountable Top cover
Freely disassembly the gamepad’s dual-side top cover. Forcibly pry the side edge position (shown as figure) along the gamepad’s controller up to disassembly; Press the top cover down to the right position to reassembly.
Wheel Button
BXY button can be triggered respectively and also dragged as joystick in a limited range. If there is no need to rotate the wheel, please disassembly the top-right cover to place the wheel ring into the limited position and cover the top-right cover again to change the fixed wheel to the general button for use.
Dual-segment Detachable
Phone Stand The stand has two adjustable rotating axes which are easy to adjust the phone ban/center and ease the burden on hands. Slide up to push out of the card slot to disassembly the holder. Adjust to the right angle to support the phone to stand on the table.
Replaceable Joystick
Left- and right-joystick can be replaced based on habits. Operated as figure to plug out up to take down or mount the joystick.
Basic Operation
Connection Instruction
Turn on the joystick first during the initial use, then connect to the device as required to switch to an appropriate connection mode. The USB dongle is firstly required to be plugged into the device’ s USB port with 2.4Ghz connection, the receiver will connect to the controller automatically.
Use on mobile phone, tablet
1: Download the Flydigi Game Center App from Google Player or App Store Scan the QR code, then download and install the Flydigi Game Center App. IOS only support below 13.4
STEP 2: Bluetooth connects to phone Go to Flydigi Game Center -Setting Management, Click – Connect, Connect the controller as the game center guides.
If the phone is turned on and the Bluetooth is in communication range, the Bluetooth will connect to the paired controller automatically. If changed to another phone to pair, it’s required to turn off the Bluetooth switch of the last device go to Flydigi game center APP to click the “Connect controller”.
Use On PC
Play PC game tr)
With 360 mode, you can play gaming masterpieces including GTAS, Assassin’s Creed, Resident Evil and Tomb Raider directly. With 2.4G wireless or wired to connect to PC, press the pairing button and “SELECT” button simultaneously for 3 seconds to switch in mode of 360 and android. The status led 1 lighting on indicates that it’s in 360 mode.
Play android emulator game -EL
With the android mode, you can play android games on the computer’ s android emulator. With 2.4G wireless or wired to connect to PC, press the pairing button and “SELECT” button simultaneously for 3 seconds to switch in mode of 360 and android. The status led 1 lighting off indicates that it’ s in android mode. Access to the Flydigi official site to download the App and PC activation tool of corresponding emulator’ s version and operate as prompt to function normally.
performance parameter
Federal Communications Commission (FCC) Statement
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
Note: The manufacturer is not responsible for any radio or N interference
caused by unauthorized modifications or changes to this equipment. Such
modifications or changes could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits fora
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
– Reorient or relocate the receiving antenna. – Increase the separation
between the equipment and receiver. – Connect the equipment into an outlet on
a circuit different from that to which the receiver is connected. – Consult
the dealer or an experienced radio/ TV technician for help.