FLYDIGI B6 Mobile Phone Cooling Fan User Manual
- June 9, 2024
- FLYDIGI
Table of Contents
B6 Mobile Phone Cooling Fan
User Manual
B6 Mobile Phone Cooling Fan
Hold mobile phone and push up against upper pull hook
- First to use: The default mode is the Smart Frequency Conversion mode. Notice: 5V 2A or higher charger output is required.
- Power Switch: Click can control the cooling fan on and off
https://www.flydigi.com/a/u.php?u=1516957121
Scanning QR code (left) to download Flydigi Game Center.
Turn on the Bluetooth to connect Cooling fan can change to multiple modes,
view more tutorials.
Smart Frequency Conversion
Cooling fan will auto adjusts cooling power for safe use of your phone. It is recommended to use a 20W or above power charger, otherwise the maximum power cannot be activated.
Rated Output
Cooling fan will output cooling power according to the selected level. It
is recommended to use a 20W or above power charger, otherwise the maximum
power cannot be activated.
Product Name：Flydigi Mobile Phone Cooling Fan B6
Model：Flydigi B6
In the box: Cooling Fan, Type-C Cable
Q & A
Q1: Is it necessary to pair with a charger with outpower of 20W and above?
– A1: In order to active maximum power, we recommend to pair with.
Q2: Why does the Cooling fan suddenly stop working?
– A2: When the temperature of the product is too high, the automatic protection mechanism will be triggered, which will automatically stop working. Please put it in a cool place and make sure before restarting.
Name and Concentration of Toxic or Hazardous Substances and Elements
This table is based on the regulations of SJ/T 11364-2014
Indicates that the concentration of the toxic or hazardous substance in all
homogeneous materials in this part is below the limit requirement in
GB/T26572-2011
Indicates that the concentration of the toxic or hazardous substance in at
least one homogeneous material of this part exceeds the limit requirement in
GB/T26572-2011
The environmentally-friendly use period of this product is 10 years based on
normal operating conditions
If quality problems occur within 15 days from the date of purchase, the user
can contact the purchase shop for return or exchange.
Federal Communications Commission (FCC) Statement
The device has been evaluated to meet general RF exposure requirement, The
device can be used in portable exposure condition without restriction Federal
Communication
Commission (FCC) Radiation Exposure Statement Power is so low that no RF
exposure calculation is needed.
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
Note: The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications or changes to this
equipment. Such modifications or changes could void the user’s authority to
operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation, This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radiocommunications. However, there is no guarantee that interference will not
occur in a particular installation. lf this equipment does cause harmful
interference to radio or television reception. which can be determined oy
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/ TV technician for help.