GENERALSCAN R5522 Ring Scanner User Guide
- June 13, 2024
- GENERALSCAN
Table of Contents
GENERALSCAN R5522 Ring Scanner
Product Information:
- Product Name: Quick Configuration Manual
- Email Support: [email protected]
- Version: 1.1
Product Usage Instructions
- Ensure you have the latest version of the Quick Configuration Manual.
- If you have any questions or need support, contact our support team at [email protected].
- Refer to the manual for detailed instructions on configuring your product.
- Follow the steps provided in the manual to set up and customize your product.
- If you encounter any issues during the configuration process, refer to the troubleshooting section in the manual for solutions.
- Once you have completed the configuration, test the functionality of your product to ensure it is working as expected.
- If you require further assistance or have any additional questions, do not hesitate to contact our support team.
More Language
This configuration manual is prepared in English, but you can access the user guide in your language by scanning the barcodes below with your phone.
GENERALSCAN Configuration Manual
This manual contains the basic configurations barcodes you need, you can adjust the settings and modes of your device according to your wishes.
Copyright
GENERALSCAN reserves the right to make changes to any product to improve
reliability, function, or design. GENERALSCAN does not assume any product
liability arising out of, or in connection with, the application or use of any
product, circuit, or application described herein.
Service Information
If there is a question with the barcode scanner, you can visit website for the live chat at: www.generalscan.com
Bluetooth HID Mode
Step 1. The Bluetooth HID mode is a Bluetooth keyboard. When you scan the barcode, the data will be output at the cursor of the text.
The blue LED of your device is fast blinking. This means that the device is in pairing mode (HID mode).
Step 2. Turn on Bluetooth of your
Step 3. Choose correct device.
Connection has been completed, the blue light of the device has turned off, which means the connection is successful. GS-BarcodeScanner BT4.0 Connected
Step 4.
Please open a notebook app on your phone, when you scan a barcode the data
will appear at the tip of the cursor. The barcode below is the test barcode.
Bluetooth SPP Mode
The Bluetooth SPP mode is a Bluetooth serial port. You need a Bluetooth serial
port software for data transmission. The SPP mode can also use the serial port
software to send commands to the scanner. We provide Android
Keyboard Pro App to help you convert serial data into keyboard data, which can
output data at the cursor, or you can use it to send commands.
Step 1. Please scan Bluetooth SPP Mode barcode;
The blue LED of your scanner is slow blinking. This means that the device is in pairing mode (SPP mode).
Step 2. Please open the application and Turn on Bluetooth’ then please change the keyboard with Generalscan Keyboard.
Step 3. Please click to ‘Connect Scanner’,
Step 4. Please click to Bluetooth Scanner’,
Step 5. Please click to ‘Go select
Step 6. Choose your ‘Barcode Scanner’
Step 7. Enter PIN ‘1234’ and click next step
Step 8. You will able to see your data in your device.
Bluetooth BLE Mode
The Bluetooth BLE mode is a Low Energy protocol after the Bluetooth 4.0
protocol. You need a BLE software for data transmission. The BLE mode can also
use the BLE software to send commands to the scanner. We provide
Android Keyboard Pro App to help you convert BLE data into keyboard data,
which can output data at the cursor, or you can use it to send commands.
Step 1. Please scan Bluetooth BLE Mode barcode;
The blue LED of your scanner is 2 fast and 1 slow blinking. This means that the device is in pairing mode (BLE mode).
Step 2. Please open the application and ‘Turn on Bluetooth’ then please change the keyboard with Generalscan Keyboard.
Step 3. Please click to ‘Connect Scanner’,
Step 4. Please click to ‘Bluetooth Scanner’,
Step 5. Please click to ‘Go select’
Step 6. Choose your ‘Barcode Scanner’
Step 7. You will able to see your data in your device.
USB-HID Mode
The USB-HID mode is a USB keyboard. When you scan the barcode, the data will
be output at the cursor of the text.
Step 1. Please scan USB-HID Mode barcode;
Step 2. Then connect your device to your computer with the USB cable that comes in the box.
Step 3. When your connection is successfull, you will hear 3 beeps from your barcode scanner. After that, you can open a text file or your own software on your computer and display your data at the tip of the cursor.
USB-VCP Mode
To use the VCP Mode (Virtual COM Port), you can scan the barcode below
PARAMETERS
- Baudrate 9600
- Data Bits 8
- Flow Control N
- Stop Bits 1
Bluetooth SPP Master Mode
You can scan the barcode below to use the Bluetooth SPP Master Mode.
For wider bluetooth distance, you can use this mode. You will need a Bluetooth
dongle D100BT-Plus to use this mode. You can purchase the Bluetooth dongle by
scanning the QR code below with your Phone’s camera.
For using this modes, please contact us. [email protected]
Suffix Settings
You can Enable or Disable the suffix by scanning the following barcodes
The default suffix is CR and LF.
Special Suffix Settings
You can change to a different suffix by scanning the following barcodes.
Offline Storage Mode
Offline storage mode is for storing scanned barcodes in the scanner when
Bluetooth is not connected, and can then be uploaded uniformly.
You can enable or disable offline storage mode by scanning the following
barcodes.
You can get the number of stored barcodes and clear the stored records by scanning the barcodes on the next page. Also you can upload barcodes at different speeds by scanning the barcodes on the next page.
Offline Storage Mode
Auto-Trigger Mode
You can turn on auto-trigger mode at different intervals, and autotrigger mode
does not go into hibernation.
Hardware Informations
You can access your device’s software version, ID, battery level and serial number by scanning the barcodes below. Make sure your barcode scanner is connected to a device to view the data.
Vibration Level
You can set the vibration level by scanning the following barcodes, only for
the R-Series.
DFU Mode
Please scan the barcode below to switch to Device Firmware Update mode.
After scanning this barcode, make sure that the blue and green LEDs of your
device are constantly lit in sequence.
To download the software for upgrade application to your phone, you can scan the QR Code below with your phone’s camera and access the application on our website. Only for Android.
For leaving DFU mode, please restart your scanner.
For R5000BT series, press 10 sec. to the trigger button.
FAQ
Default Factory Setting
You can restore the default factory settings by scanning the following barcode.
Service Information
If you have a question with your GENERALSCAN barcode scanner,please visit our
service page for assistance.
www.generalscan.com/service
QUICK CONFIGURATION MANUAL
Email: [email protected]
©2022 GENERALSCAN All rights reserved.
Version 1.1