Shanghai Flydigi Electronics Technology Direwolf Gaming Controller User Manual

June 3, 2024
Shanghai Flydigi Electronics Technology

Shanghai Flydigi Electronics
Technology Direwolf Gaming Controller
User Manualhttps://bs.flydigi.com/topicDetail?id=73553

When the product is shipped, the English version of the user manual will be displayed in the form of an online document, which can be viewed by scanning the QR code on the right above the code.
Controller FCC ID: 2AORE-FP1
Dongle FCC ID: 2AORE-R2

Connection – Use on the computer

Wireless dongle connection

Shanghai Flydigi Electronics Technology Direwolf Gaming Controller - Figure
1

  1. Plug the dongle into the USB port of the computer

  2. Set the controller back to switch to
    Shanghai Flydigi Electronics Technology Direwolf Gaming Controller - Figure
3

  3. Click the , the controller will automatically connect, At this time, the light is always white

  4. If the light is blue, press and hold the + X key at the same time Until the light turns white, press and hold until the light in flashes, unplug the dongle and reinsert it to  complete the pairing

Wired connection
Turn the controller back switch to , and connect the PC and controller through the USB cable, the light will stay white Connection successful

Connection – Use on Switch

Shanghai Flydigi Electronics Technology Direwolf Gaming Controller - Figure
2

  1. Click the controller icon on the Switch Enter [Change Grip/Order]

  2. Set the controller back to switch to
    Shanghai Flydigi Electronics Technology Direwolf Gaming Controller - Figure
4

  3. Press and hold the for 3 seconds until the light in blue flashes, the controller will be auto-paired, and the light will stay blue

  4. For daily use, set the back switch to , click the and the controller will auto-connect

A| B| X| Y| SELECT| START| |
---|---|---|---|---|---|---|---
B| A| Y| X| –| +| Home| Capture

Switch

Connection – Use on Android devices

Shanghai Flydigi Electronics Technology Direwolf Gaming Controller - Figure
5

  1. Set the back switch to

  2. Press and hold the for 3 seconds until the light in a blue flash, the controller will enter the pairing mode
    Shanghai Flydigi Electronics Technology Direwolf Gaming Controller - Figure
6

  3. Turn on the device Bluetooth and connect to Flydigi Direwolf. The light will stay blue

  4. For daily use, set the back switch to click , and the controller will auto connect

Connection – Use on iOS devices

Set the back switch to , Turn on the device Bluetooth, and connect to Xbox Wireless Controller. The light will stay blue

Specifications

Mode

| Platform| light| Connection
method|

System
requirements

---|---|---|---|---
| PC| White| USB Dangle| Win 7 and above
| PC/Android| Blue| Wired/Bluetooth| Wired: Win 7 and above
Bluetooth: Android 10 and above
| Switch| Blue| Bluetooth| Switch
| iOS| Blue| Bluetooth| iOS 14 and above

Radiofrequency: Wireless, Bluetooth 5.0
Use Distance: less than 10 meters
Battery information: rechargeable lithium-ion battery, battery capacity 450mAh, charging time 3 hours,
Charging voltage 5V, charging current 350mA
Working current: the current is less than 40mA during use, and the current is less than 20µA during standby
Product weight: 175 g
Temperature range: 5 ℃~ 45 ℃ use and storage

Appearance

Shanghai Flydigi Electronics Technology Direwolf Gaming Controller - Figure
7

Other accessories (multi-mode)
USB-C cable/USB wireless Dongle

  1. Handle mode gear for multimode only

Flydigi space station, Set your own customization
Visit Flydigi official website www.flydigi.com and download “Flydigi Space Station”, you can customize buttons, macros, somatosensory, Triggers, and other functions.

Flydigi space station

Button mapping
The button can be mapped as the controller button, mouse and keyboard button| Somatosensory mapping
The somatosensory can be mapped to mouse movement, and the  shooting game is extremely accurate
---|---
Macro definition
You can set up continuous transmission, record joystick and key  data, simplify tediously operation| Trigger adjustment
Adjustable trigger stroke/dead zone to meet multi-scene control needs

Q&A

Q: The controller cannot be paired with the Dongle or Bluetooth device?
A: Please make sure the controller back switch position is correct, long press the for 3 seconds, the light in flashes, and the handle enters the pairing mode, unplug the Dongle  and reinsert it, cancel the paired device on the Bluetooth settings page, and reconnect.

Q: How to upgrade the handle firmware?
A: Install Flydigi Space Station on your computer, or install the Flydigi Game Center App on your mobile phone, according to the software Guide to firmware upgrade”

Name and Concentration of
Toxic or Hazardous Substances and Elements

Part Name Toxic or Hazardous Substances and Elements
Pb Hg Cd Cr PBB PBDE
PCBA 0
Outer casing 0
Packaging 0
Wires 0
Polymer battery 0
Silicone Q
Metal, adhesive tape and small structural parts

This table is based on the regulations of SJ/T 11364-2014
indicates that the concentration of the toxic or hazardous substance in all homogeneous materials in this part is below the limit requirement in GB/T 26572-2011
indicates that the concentration of the toxic or hazardous substance in at least one homogeneous material of this part exceeds the limit requirement in GB/T 26572-2011
The environmentally-friendly use period of this product is 10 years based on normal operating conditions.

Federal Communications
Commission (FCC) Statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction Federal Communication Commission (FCC) Radiation Exposure Statement Power is so low that no RF exposure calculation is needed.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user  is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/ TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals