2AORE-K2 K2 Car Dash Camera

Product Information

Specifications

• Model: [Model Name]
• Dimensions: [Dimensions]
• Weight: [Weight]
• Power Source: [Power Source]
• Frequency Range: [Frequency Range]
• Maximum Power Output: [Maximum Power Output]

Product Usage Instructions

1. Unpacking and Setup

Before using the product, carefully unpack it and ensure that
all the components listed in the packaging are included. Follow
these steps to set up the product:

1. Place the product on a stable surface.

2. Connect the power cable to the designated port on the
   product.

3. Plug the other end of the power cable into a power outlet.

4. Switch on the product using the power button.

2. Product Controls and Interface

The product is equipped with various controls and interfaces
that allow you to interact with it. Familiarize yourself with these
components:

• Power Button: Used to turn the product on/off.

• Volume Control: Adjusts the volume level of the product.

• Menu Button: Accesses the product’s menu options.

• Navigation Buttons: Navigate through menu options or
  settings.

• Display Screen: Shows information, settings, and other relevant
  details.

3. Basic Operations

To start using the product, follow these basic operations:

1. Press the power button to turn on the product.

2. Use the volume control to adjust the desired volume level.

3. Press the menu button to access the menu options.

4. Use the navigation buttons to scroll through the menu and
   select options.

5. Follow the on-screen instructions or refer to the user manual
   for specific operations.

4. Maintenance and Care

To ensure the longevity and optimal performance of the product,
follow these maintenance and care guidelines:

• Keep the product away from direct sunlight and extreme
  temperatures.

• Regularly clean the product using a soft, dry cloth.

• Avoid using harsh chemicals or abrasive materials on the
  product’s surface.

• Ensure proper ventilation around the product to prevent
  overheating.

• Refer to the user manual for additional maintenance
  instructions.

Frequently Asked Questions (FAQ)

Q: How do I reset the product?

A: To reset the product, locate the reset button on the back
panel. Use a small, pointed object (such as a paperclip) to press
and hold the reset button for 10 seconds. The product will restart
and return to its default settings.

Q: Can I connect the product to external speakers?

A: Yes, the product has an audio output port that allows you to
connect it to external speakers. Use an appropriate audio cable to
connect the product’s audio output port to the input port of your
external speakers.

Q: Is the product compatible with wireless devices?

A: Yes, the product supports wireless connectivity. Refer to the
user manual for instructions on how to connect and pair wireless
devices with the product.

FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference. (2)This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note:This equipment has been tested and found to comply with the limits for a class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequence energy and,if not installed and used in accordance with the instructions,may cause harmful interference to radio communications.However,there is no guarantee that interference will not occur in a particular installation.if this equipmemt does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an autlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>