FLYDIGI Wasp Wing 2 Pro Swirl Exhaustion Stepless Cooling Instruction Manual
- June 6, 2024
- FLYDIGI
Table of Contents
FLYDIGI Wasp Wing 2 Pro Swirl Exhaustion Stepless Cooling
Wasp Wing 2 Pro
Hold the mobile phone in your hand and push up against the upper pull hook
Connect the power supply and toggle the switch to ON
Scan the QR code on the left, download Flydigi Game Center connect the Wasp
Wing 2 pro, and enable the following features.
-
Infinitely adjustable
Freely adjustable cooling speed -
Dazzling light switch
Control lights on or off -
Temperature monitor
Monitor mobile phone temperature (support Android only) , monitor temperature of the Wasp Wing 2 Pro(support both Android and IOS)
Scan the QR code on the left to enter the FLYDIGI official website for more
product information and services.
Name and Concentration of Toxic or hazarous Subtances and Elements
Part Name
|
Toxic or Hazardous Substances and Elements
---|---
(Pb)|
(Hg)
| (Cd)| (Cr (VI))| (PBB)| (PBDE)
PCBA| ○| ○| ○| ○| ○|
○
Outering casing| ○| ○| ○| ○| ○|
○
Packaging| ○| ○| ○| ○| ○|
○
Wires|
○
| ○| ○| ○| ○|
○
Polymer battery|
○
| ○| ○| ○| ○|
○
Silicone|
○
| ○| ○| ○| ○|
○
Metal,adhesive tape and small strutural parts|
○
| ○| ○| ○| ○|
○
Federal Communications Commission (FCC) Statement
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction Federal
Communication
Commission (FCC) Radiation Exposure Statement Power is so low that no RF
exposure calculation is needed.
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
Note: The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications or changes to this
equipment. Such modifications or changes could void the user’s authority to
operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help