JONSBO CR-1000PLUS Cooler Dual Fan Instruction Manual

JONSBO CR-1000PLUS Cooler Dual Fan

PART LIST

Intel Installation

1. Remove the fan before instal heatsink
2. Installing the Intel bracket
3. Applying thermal paste/ Remove the protection film
4. Place the backplate at the rear of motherboard as shown
5. Adjust the slider on thebackplate to correspoding position
6. Secure the cooler with screwdriver
7. Connect the power cord to the motherboard

AMD Instalation

1. Remove the fan before install heatsink
2. Installing the AMD bracket
3. Remove the plastic retainers of the AMD retention module
4. Applying thermal paste/ Remove the protection film
5. Adjust the screws on the brackets to correspoding position
6. Secure the cooler with screwdriver
7. Mounting the fan to the heatsink
8. Connect the power cord to the motherboar

2017 JONSBO SHENZHEN TECHNOLOGY CO., LTD. All right reserved. Specifications are subject to change without prior notice. Some trademark may be claimed as the property of others.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>