JONSBO MOD-3 Mini PC User Manual
- June 2, 2024
- JONSBO
Table of Contents
JONSBO MOD-3 Mini PC
Package Content
Q’ty/ Used for
- 6/Screw- HDD
- 4/Screw – SSD
- 10/rubber grommet
- 1/Hex Standoff
- 8/Cable tie
- 8/Graphics card, PSU Screws
- 18/Red washer
- 8/Mainboard Screw
- 1/AL standoff
- 16/Fan Screw
Connectors
Parts Diagram
Installation Guide
Side Tempered Glass Panel Removal
- Unscrew left/ right side panel screws, and remove the left/right side glass panel
Motherboard Installation
- Secure the MB to the corresponding position
GPU Installation
- Insert the GPU into MB PCI-E slots, secure with screws.
PSU Installation
- Secure the PSU on the mounting plate with screws
2.5″SSD -01 Installation
- Pre-assembly the SSD with rubber grommets and screws
- insert the SSD into the slots on the rear of the MB tray
3.5″ HDD-02 Installation
- Pre-assembly the HDD with rubber grommets and screws
- insert the HDD into the slots on the rear of MB tray.
Fan – Liquid cooling radiator support
- Fan: Top: 120mm2 / 140mm2, Front: 120mm *2
- Radiator: 240/280/360
- Please remove the six screws before installing the fan in the front.
© 2017 JONSBO SHENZHEN TECHNOLOGY CO., LTD. All right reserved. Specifications are subject to change without prior notice. Some trademark may be claimed as the property of others.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>