JONSBO T8PLUS Mid Tower Case User Manual
- June 3, 2024
- JONSBO
Table of Contents
JONSBO T8PLUS Mid Tower
Parts Diagram
Remove side panel
- Tempered glass side panel
- Main Chassis
- PSU bracket
- 2.5″ SSD bracket
- PCI slot bracket
- PCI cover
- Dust filter
- Aluminum Case feet
Installation Guide
- Release the two screws
- Pull to release the side panel (Handle with care!)
PSU installation
-
Remove PSU bracket from chassis
-
Install the PSU to bracket, secure with screws.
-
Install PSU back to chassis, secure with screws
GPU / add-on
card installation -
Remove PCI cover, and PCI slot brackets
-
Insert the GPU/Add-on card to PCI-E Slot on MB, secure with screw
GPU / add-on card installation
- Remove PCI cover, and PCI slot brackets
- Insert the GPU/Add-on card to PCI-E Slot on MB, secure with screw
- Close the opening with PCI Cover, and secure with screw
- Remove the 5″ device cage first, secure 2.5″ SSD with screws, install back to chassis and score with screws
- Place the 5″ SSD on the bottom cover, secure with screws (when not using bottom intake fan)
- Place the 5″ SSD behind the front panel, and secure with screws
Close the cover
Insert the side panel on the chassis, and secure with screws (Handle with
care)
Specification
| Dimension | 163mm(W)272mm(H)282mm(D) |
|---|---|
| Motherboard | ITX(170*170mm) |
| Max. CPU Cooler Height | 135mm |
| Max. Display Card Length | 270mm |
| Material | External Panel: 2.5mm Aluminum Alloy Internal: Structure: 0.8mm SGCC |
Steel Side Panel: 3mm Full Tempered Glass
Drive Bay| 32.5 SSD+12.5SSD (without bottom120mm fan)
Front 1/0 Port| USB3.01 , Type C1
Cooling System| TOP: 140mm1 (Pre-Install) Bottom: 120mm2 (Optional) Rear:
92mm*1(Optional)
PSU Support| ATX
PCI Expansion Slot| 3
Weight| Net 3.2kg
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>