JONSBO TW7-360 Integrated Water Cooling User Manual
- October 30, 2023
- JONSBO
Table of Contents
JONSBO TW7-360 Integrated Water Cooling
Product Information
This product is an all-in-one liquid cooling system for desktop computers. It consists of a pump unit and a radiator with fans to dissipate heat efficiently from the CPU. The pump unit has a 3-pin connector that needs to be connected to the AIO/PUMP socket on the motherboard.
Product Usage Instructions
- Ensure that your computer is turned off and unplugged from the power source.
- Locate the AIO/PUMP socket on your motherboard. It is usually located near the CPU socket.
- Connect the 3-pin connector from the pump unit to the AIO/PUMP socket on the motherboard. Ensure that it is connected securely.
- Attach the radiator to the case using the provided screws and ensure that it is mounted securely.
- Connect the fans to the radiator and ensure that they are securely mounted.
- Connect the power cables of the fans to the CPU fan headers on the motherboard.
- Connect the power cables of the pump unit to a SATA power connector from your power supply unit.
- Turn on your computer and check if the liquid cooling system is working properly.
It is important to follow these instructions carefully to ensure that the liquid cooling system functions properly and efficiently. Failure to do so may result in damage to your computer components.
Part List
Installation Instruction
Applying thermal paste / Remove the protection film
Installing the Intel / AMD bracket
Secure the cooler – Intel LGA 115×/1200/1700
Secure the cooler -Intel LGA 2011
Remove the plastic retainers of the AMD retention module
Secure the cooler -AMD
- Connect the 3-pin connector from the pump unit to AlO/PUMP socket on the motherboard
- Connect the 4-pin fan PWM connector to CPU_FAN socket on the motherboard
- Connect to 5V ARGB LED socket on motherboard
Secure the the fans and radiator
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>