JONSBO TK-3 Medium Tower PC Case User Manual

JONSBO TK-3 Medium Tower PC Case

Package Content

Connectors

Parts Diagram

1. Glass panel
2. Air filter
3. Chassis
4. Plastic top cover
5. Side panel
6. HDD bracket
7. PCI E card strip
8. PCI-E cover

Installation Guide

1. Remove glass and side panels before installing hardware.
2. Unscrew the 4 thumb screws of the glass to remove the glass.
3. Unscrew the 2 thumb screws on the rear panel to remove the side panel.
4. Remove external cover
   • Place the motherboard in the area shown in the figure and secure with screws.
5. Graphics card Installation
6. Remove the PCI-E bracket.
7. Insert the graphics card into the motherboard slot, and secure with screw.
8. Fan
   • Top 120mm x 3 or 140mm x2 fans (360mm or 280mm water cooling radiator), bottom 120mm X3 fans (360mm water cooling radiator), Motherboard 120mm X 3 fans, Rear panel 120mm X 1 fan.
9. PSU Installation
   • The power supply is placed in the installation area and locked with screws.
10. HDD Installation
11. Remove the HDD bracket, Install the HDD to the bracket.
12. Install the HDD with bracket back to the chassis.
13. SSD hard disk installation
14. Remove the HDD bracket, install the SSD t the bracket with screws and rubber grommets.
15. Insert the DD to the bracket to the correspond slots, push in to secure.
16. Install the HDD bracket back to chassis. and secure with screws.
17. Top cover and side panel installation
    • Install the top cover and right side panel.
18. Glass panel installation
    • Place the glass panel to the correspond place, secure with screws.

Dongguan Sibositong Industrial Co., Ltd.
No.5, Xinglong Lu, Sanzhong Village, Qingxi Town, Dongguan City, Guangdong Province, 523651, China
© 2022 JONSBO Technology Co., Ltd. All right reserved. Specifications are subject to change without prior notice. Some trademark may be claimed as the property of others.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>