JONSBO C6-ITX Micro ATX Mesh Case User Manual
- June 1, 2024
- JONSBO
Table of Contents
C6-ITX
User Manual
Package Content
Image| Q’ty|
Used for
---|---|---
|
12
|
Screw – PSU, MB, HDD,
| 12|
Washer
| 4|
Screw – SSD
| 5|
Cable tie
| 12|
Fan Screw
| 1|
Braided handles
Connectors
| USB 3.0 | HD AUDIO |
|---|---|
F_PANEL
The connector diagram only shows the line sequence reltionship. Please refer
to the actual product for functions
Parts Diagram
| Parts
---|---
1| Main Chassis
2| Power stand
3| Top Mesh Panel
4| PCI slot bracket
5| Handles
6| Right Mesh Panel
7| Front Mesh Panel
8| Bottom filter
9| Foot base
10| PCIE cover
11| Left Mesh Panel
Installation Guide
- Disassemble the stencil before installing the hardware
1. Press the button on the rear panel of the chassis to open the top panel.
2.Push the side panel and front panel out of the inside of the case.
- Before installation, please also remove all the multi-functional brackets
Remove the multi-functional brackets
-
Motherboard Installation
The motherboard is placed into the chassis and locked with screws. -
PSU installation
1.Remove the power rack.
2.The SFX power supply i installed on the bracket vith screws.
3 When instaling the ATX powier supply, firt break offthe SFX half-piece, and
then instll the power Supply:
- Fan bracket installation
1. Assemble the top fan and bracket and install them into the chassis
2. Top 120mm”L, rear panel 120mm1, bottom panel 120mm”1
- Storage device installation
The hard disk is installed on the bottom plate, and the mounting holes are
locked with screws.
The 3.5HDD hard drive and fan share the same installation location.
- Graphics card installation
1. Remove the PCI cover and PCI-E card strip.
2. Insert the graphics card into the motherboard card slot and lock it with a
screw.
- Mesh panelinstallation
Install the mesh panels
- Strap Handle installation
Strap Handle installation
Dongguan Sibositong Industrial Co., Ltd.
No.5, Xinglong Lu, Sanzhong Village, Qingxi Town, Dongguan City, Guangdong
Province, 523651, China
©2023 Dongguan Sibositong Industrial Co., Ltd. Al right reserved.
Specifications are subject to
change without prior notice. Some trademark may be claimed s the property of
others.