JONSBO HX6200D White CPU Cooler 6 Heat Pipe Air User Manual

JONSBO HX6200D White CPU Cooler 6 Heat Pipe Air

Part List

• CPU heatsink
• Washer
• Position screw
• Nut set
• Bracket Screw
• Bracket-Intel
• Bracket-AMO
• Position screw (1700)
• Backplane – AMS
• Wrench

Intel Installation

Step 1

• Insert the position screws to corresponding holes of Intel brackets, fixing them with nuts

Step 2

• Secure Intel brackets to cooler with bracket screws

Step 3

• Apply thermal paste on CPU / Remove the protection film

Step 4

• Align CPU cooler mounting holes of MB with positioning screws, snap it back on the cooler, and insert the washers.

Step 5

• Tighten hexagon nut.

Step 6

• Connect the fan cable to CPU_FAN socket on MB.

AMD Installation

Step 1

• Insert the position screws to corresponding holes of AMD brackets, fixing them with nuts.3

Step 2

• Secure AMD brackets to cooler with bracket screws

Step 3 AM3/AM4

• Remove the plastic bracket and backplane for AMD fixing the radiator.

Step 4 AMS-1

• Remove the CPU fixing bracket and AMD fixing plastic bracket and backplane

Step 3 AM5-2

• Assemble the AMS backplane and the CPU mounting bracket to the motherboard.

Step 4

• Apply thermal paste on CPU / Remove the protection film.

Step 5 AM3/AM4

• Align the main board hole with the radiator locating screw, install the gasket, screw on the hexagon nut, and then tighten it with a sleeve.

step 5 AM5

• Align the main board hole with the radiator locating screw, install the AM5 backplate Screw on the hexagon nut and then tighten it with a socket.

Step 6

• Connect the fan cable to the CPU_FAN socket on MB.

2022 JONSBO Technology Co. Ltd. All right reserved.

Specifications are subject to change without prior notice. Some trademarks may be claimed as the property of others.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>