Woltu DG004ws Height Adjustable Professional Vertical Instruction Manual

Woltu DG004ws Height Adjustable Professional Vertical

Specifications

• Input Voltage: 220-240V~
• Power: Not specified
• Water Tank Capacity: Not specified
• Operating Instructions: Refer to the manual
• Frequency: 50-60Hz 3.
• Power: 1950W
• Heating time: 60s
• Altitude: below 1000m
• Automatic protection: overheat protection
• Recommended room temperature: 5-40°C 8.
• Noise: <60 dB (A)

Product Information
The product is a steam iron with various components including a steam dispenser, telescopic rod, hanger, water tank, wheels, and more. It is designed for ironing clothes efficiently and effectively.

Assembly Guide

Follow the provided guide to assemble the components such as the steam dispenser, telescopic rod, hanger, and water tank.

• The stainless steel rod is made up of four sections.

• Stretch the second section and rotate clockwise to lock it. The height can be set according to specific needs.

• Repeat the same operation in the fourth section. (Fig. A)

• Insert the dispenser holder into the folding hanger. (Fig. B)

• Insert the folding hanger into the upper part of the rod. (Fig. C) Insert the telescopic rod into its attachment. Screw it clockwise to lock it securely. (Fig. D)

• Insert the steam hose into its connection.

• Screw it clockwise until it is completely tightened. (Fig. E) First, align the bottom part of the steam wand and then Gently snap the trouser clip into place. (Fig. F)

• Fill the tank with water, then close the lid tightly.
  Note: fill with cold water only. Do not fill with hot water. To prolong the life cycle of the product, the use of purified water is preferable. (Fig. G)

• Put the tank back in place after filling with water. (Fig. H)

• Insert the power plug into the AC 220V-240V socket. (Fig. I)

• Steam level 1 (weak level): press the red switch. Steam level 2 (medium level): press the green switch.

• Steam level 3 (intense level): press the red switch and the green switch. (Fig. J) Open the drain valve to empty the water after use or if you plan to store the appliance for a long time. (Fig. K)

Instructions

Before use, fill the water tank with water. Ensure the water level is appropriate during operation. Do not leave the appliance unattended while in use, especially around children. Always let the product cool for at least 30 minutes before storing it.

Ironing Method
Adjust the steam settings as needed and glide the iron over the clothes to remove wrinkles. Use the hanger for convenient storage of clothes during ironing.

• Ironing method For best results, make sure the fabric is clean and taut before steam ironing, holding the hem of the garment with your hand and pulling it slightly downwards.
  Note: The surface of the garment must be as tense as possible. (Fig. L) Place the steam wand close to the garment and press it gently downward .

• Move the dispenser up/down from the top of the head downwards. (Fig. M) Hold the hem of the garment and iron the bottom of the clothing in the direction indicated by the arrow.

• Be careful of the hot steam that comes out from the dispenser. (Fig. N) Press longer on the collar and iron in the direction indicated by the arrow. (Fig. OR) Stretch the sleeves and press on them longer with the dispenser.

• Iron in the direction indicated by the arrow. (Fig. P) Pull the hem down to iron the back of the garments in the direction indicated by the arrow. (Fig. Q)

• After ironing, the seam of the trousers will be flat and well stretched. (Fig. R)

Using the Pants Clip

Attach the pants securely to the clip provided on the hanger to keep them in place while ironing.

Troubleshooting

If the product encounters issues like low steam or water leakage, refer to the troubleshooting guide in the manual for solutions.

Instructions and warnings

• Voltage: 220-240V~ Do not connect any other high-power appliance to the same socket as the current.
• To avoid electrical leakage or other dangers, please refer to correct use. Do not immerse the power cord or plug in water or other liquids.
• To avoid accidents, do not leave the appliance unattended during operation operation. Be careful when using the appliance in the presence of children.
• Fill the tank with water before use. Pay attention to the level of water during operation.
• Do not leave the steam hose on the ground or coiled up. The tube must be positioned vertically.
• To avoid burns, do not touch the steam or the heating parts.
• The appliance can be moved using the rod, whether it is blocked or cannot be moved easily, do not force it.
• Empty the water tank first to inspect the wheels. Before putting the product away, let it cool for at least 30 minutes
• Empty any excess water left in the tank.
• Always unplug the appliance from the electrical outlet when filling 1 with water or emptying it. Do not let water leak.

Always unplug the appliance from the electrical outlet before cleaning, before moving it and when it is not in use. Do not store the appliance near flammable and/or explosive fumes. Do not use the appliance if there are any malfunctions or if the plug in the power cord is damaged. Unplug to disconnect the appliance from the power socket. Not never pull it by the cable. Do not use multiple electrical sockets, to avoid overloading and the risk of fire. Do not add additives to the water, otherwise the appliance may get damaged. We recommend using demineralised or distilled water.

Note
When using the appliance, pay attention to splashes of water hot to avoid burns. This appliance is not intended for use by children or people with reduced physical, sensory or mental capabilities, or lack of experience or knowledge unless they are supervised or have been instructed in their use of the appliance by a person responsible for their safety. Children must be supervised to ensure they do not play with the appliance. Make sure the appliance is turned off and unplugged from the power outlet when filling the tank and during cleaning. If the power cord is damaged, contact the customer service manufacturer or a qualified technician to avoid danger.

Components

1. Dispenser support
2. Telescopic rod
3. Steam dispenser
4. Foldable hanger
5. Steam hose
6. Water tank
7. Rotate
8. Steam hose connection
9. Power switch
10. Rod attachment
11. Trouser clip

How to use the trouser clip

• To use the trouser clip safely, we recommend wearing gloves insulating to avoid burns during steam ironing.
• Hook up and steam iron the seam of the trousers vertically.

Troubleshooting

a professional technician.
Little steam.| The tube is blocked by encrustations./Low voltage.| Use neutral detergents for cleaning./Ensure the voltage is stable.
Water leak from the tank.| The water tank is broken./The tank cap wasn’t closed properly or was not aligned with the mouthpiece.| Replace the tank./Align the cap with the mouthpiece.
The water in the tank becomes hot.| The tube forms a “U” or the steam nozzle is blocked by limestone.| Eliminate build-up of scale or straighten the tube.
Water leak from the attack of the tube.| The sealing ring is loosening or wearing out.| Replace the sealing ring and tighten the tube at the attachment.
Water leak from the steam dispenser.| The steam nozzle is broken./The steam dispenser is at a lower level.| Replace the steam dispenser./Hold the hose in a vertical position and drain the water.
Crack on the handle.| It was not well fixed or is damaged.| Refit the handle or replace it.
The tube produces abnormal noises.| The tube forms a “U”./The steam nozzle is at a lower level.| Straighten the tube./Hold the tube in a vertical position and let the water drain.
Deformation of the tank.| The tank is deformed.| Replace the tank.
Steam does not come out, but the switch is on.| The steam generator is burned out./The relay does not work./Water level is low.| We recommend the assistance of a professional technician.
Alarm when the water level is normal.| The level indicator is underwater or damaged.| Extract the level indicator or replace it.
The alarm does not go off when the water level is low.| Excessive accumulation of limescale in the water tank.| Clean the water tank. It is recommended to seek assistance from a professional technician.

After-sales assistance
If you have any problem, please contact our customer service through the purchasing channel in which the order was placed.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>