GE Lighting 76850 StayBright LED Flickering Votive Candles User Guide
- June 9, 2024
- GE Lighting
Table of Contents
GE Lighting 76850 StayBright LED Flickering Votive Candles
USE AND CARE INSTRUCTIONS
The instructions below should be followed for the proper use and care of this product：
- Do not expose the candle to moisture.
- Not for outdoor use.
- Replace only with 1 Button Cell(CR 2032) battery.
- Clean the battery contacts and also those of the device prior to battery installation.
- Install 1 Button Cell(CR 2032) as shown(FIG.2).
- Remove the battery from the product when not in use for an extended period of time.
- Remove the used battery promptly.
- Turn the light ON/OFF as shown(FIG.1).
WARNING
DO NOT expose batteries to fire, attempt to recharge, use different sizes, or install backward. Do not insert incorrectly. DO NOT mix old and new batteries. Exhausted batteries are to be removed from the product. DO NOT mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries. The battery cannot be ingested. Never handle damaged or leaking batteries – may result in burn injuries or cause serious internal injuries if swallowed. Obtain medical attention immediately. Misuse can cause the battery to overheat, rupture, leak or explode, resulting in personal injury and property damage. Do not use rechargeable batteries. Remove batteries when not used for an extended period of time, or when depleted.
KEEP AWAY FROM CHILDREN
Troubleshooting
| PROBLEM | POSSIBLE CAUSE | CORRECTIVE ACTION |
|---|---|---|
| If the product does not light |
- The product is not turned on.
- Battery assembled incorrectly
- Low power or dead battery.
|
- Turn the switch on the bottom to ON.
- Follow the battery installation procedure.
- Replace with a new battery.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions：
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Modifications not approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Warning:
Do not modify this product in any way unless approved by the manufacturer.
Note:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the distance between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
For questions
Call customer service toll-free at
1-877-398-7337 or visit us on the web
at www.geholidaylighting.com.
Nicolas Holiday Ltd. 246 Spring Hill Road, Unit B, Trumbull CT 06611.
@2022 Nicolas Holiday Limited,9F., No. 37, Guangfu N. Rd Taipei, Taiwan 10560.
All rights reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>