CelsusSound HealthPods S300 Bone Conduction Headphones User Guide
- June 1, 2024
- CelsusSound
Table of Contents
CelsusSound HealthPods S300 Bone Conduction Headphones
Specifications
- Model: $FMTVT4PVOE
- Brand: Unknown
- Power: 2V
- Frequency: 0XOWL %XWWRQ
- Input: 6VDC
Product Usage Instructions
Initial Setup
- Ensure the device is placed on a stable surface with proper ventilation. Connect the power source to the device.
Operating the Device
- To power on the device, use the designated power button. Follow the user manual for specific operations related to the functions of the device.
Maintenance and Care
- Regularly clean the device with a soft, dry cloth. Avoid using harsh chemicals that may damage the device. Keep the device away from water or moisture.
Safety Precautions
- Do not attempt to disassemble or modify the device as it may result in damage or voiding the warranty. Keep the device away from heat sources and direct sunlight.
FAQ
- What should I do if the device is not powered on?
- If the device is not powered on, check the power source and ensure it is properly connected. If the issue persists, contact customer support for assistance.
- How do I reset the device to factory settings?
- To reset the device to factory settings, locate the reset button on the device and hold it for 10 seconds. Follow the user manual for detailed instructions.
- Is this device compatible with all power sources?
- This device is designed to work with a specific power input of 2V. Ensure you are using a compatible power adapter to prevent damage to the device.
HOW TO USE
Front view
On/ Off/ Connect
- Long press for 3 seconds to turn on/off Automatic search and pairing at the first boot Turn on again and automatically connect to the device in memory Device name: Health Pods S300
Music Playing
- Single click to the play and pause Double click to the next Triple click on the previous
Voice Calls
- Single-click on the answer and hang up Double-click on the Reject Long press for 2s to answer the second call
Volume Control
- When playing music and voice calls, rotate the multi-function buttons left and right to adjust the volume
Voice Assistant
- When music is playing and in standby state, long press for 2 seconds to open Apple Siri and Google Assistant, etc.
Disconnect
- Press the “multi-function button” and turn left to disconnect the current connection and restart the search and pairing
Phone Call
- Press the “multi-function button” and Turn right to make the last call’s phone
Power and charging
- Every time you turn on, you will be prompted with a voice prompt for the current battery level.
- If the battery is below 10%, it will alarm. Please use a Type C cable to charge.
Reset and Reboot
- When booting press and hold for 6 seconds to reset the device and clear all memories, press and hold for 10 seconds in any state to restart the device
LED Status
- Pairing >> Red and blue flashing alternately, Connected and Pause >> Blue LED flashing quickly Low battery alarm >> Red LED flashing quickly, Battery charging >> Red LED flashing slowly Playback >> Blue LED flashing every 3s
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, maycause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0cm between the radiator and your body.