ZIPPO 65884 Asia Pipe Butane Lighter Insert User Manual
- June 12, 2024
- ZIPPO
Table of Contents
ZIPPO 65884 Asia Pipe Butane Lighter Insert
FILLED/EMPTY YELLOW FLAME INSERT WARNING:
WARNING : KEEP LIGHTER AND THEIR FUELS our OF REACH OF CHILDREN. Ignite lighter awW’j from face and clothing. Be sure flame out after use. If filled, cootalns flammable gas under presstre. If unfilled, when filled, will contain flammable gas under pressure. Never el<P()Se to heat above so·c (122’f) or to prolooged sunlight Never puncture or put in fire. Do not keep lit for more than 30 seccmds. Do not refuel ewer cootainers sudl as sinks or near a flame. Butane tends to settle and collect in the lowest point
- If you have any prob ems wilh lhe operation of your Product, DO NOT return it to the re ltail store. Instead, consumers should contact their local distributors listed on zippo.com.
- WARNING : Read all safety warnings and inslructicns. Failure to follow ttle warnings and instructions may result in Product damage and/c.- serious injury. Extra care should be taken to prevent bum, injury, or fire. Save these instructions for future refereoce.
GENERAL SAFETY WARNINGS AND INSTRUCTIONS
- Keep lighters and their fuels out of reach of children.
- Ignite lighter away from face and clothing.
- Be sure flame is out after use.
- When filled, will contain flammable gas under pressure.
- Use butane fuel only.
- DO NOT refuel over containers such as sinks or near a flame. Butane tends to settle and collect in the lowest point.
- Fill or refill in a well-ventilated area.
- Hold insert or lighter away from face.
- Use Zippo butane fuel for best performance.
- For safe refilling: ensure proper mating between refill can nozzle and lighter filling valve.
- Wait at least 2 minutes after refilling before using the insert.
- DO NOT keep lit for more than 30 seconds.
- Never expose to heat above 50°C (122°F or to prolonged sunlight.
- Never puncture or put in fire.
- DO NOT point lighter towards face.
- This insert is only designed to work with regular-sized genuine Zippo Windproof Lighter models including; Regular, Vintage, Armor®, and 1941 Replica.
- DOES NOT work with Slim or 1935 Replica models.
- DO NOT attempt to disassemble the Product for cleaning or modify it in any manner. This will void the warranty.
- Always grasp lighter case edge(s) with fingers) and thumb when inserting or removing butane insert. Gripping face of lighter may cause difficulty.
- Follow all instructions and warnings provided by manufacturer of any other item when using this product.
DISCLAIMER:
ZIPPO WILL NOT BE RESPONSIBLE OR LIABLE FOR ANY DAMAGES YOU OR ANY THIRD PARTY
MAY SUFFER AS A RESULT OF USE OR MISUSE OF THIS PRODUCT.
Yellow Flame Pipe Butane Lighter Insert
- Flint wheel
- Ignition button
- Flame
- Cam
- Butane Filling Valve
- Flint screw
OPERATING INSTRUCTIONS
Install the Insert into your Zippo Lighter Case.
BUTANE FILLING INSTRUCTIONS:
Fill or refill in a well-ventilated area.
IGNITION:
Strike the Flint Wheel in a downward motion then press the Ignition Button
with your thumb and hold to ignite flame.
To re-flint your Zippo Yellow Butane Lighter:
Insert Remove screw (6) and attached spring at the bottom of the insert. Be sure old flint is removed from tube. Place new flint in tube and replace spring, screw lightly. Be sure screw is turned as far as it will go. If wheel binds after new flint is inserted, turn wheel backwards a few times.
Performance Tips
- Like all butane lighters, the performance of this lighter insert is affected by high altitudes over 5,000 feet (1,500 meters). For optimum performance, always use Zippo® or Ronson® butane fuel. Use of other brands may result in clogging and poor ignition rate, especially at high altitudes and below-freezing temperatures.
- All butane lighters must be kept above freezing in order to operate. Storing lighter insert in an inner pocket or warming it in your hand for a few minutes will enable the lighter to be used at cold temperatures.
Imported by:
Zippo Asia, Limited 6/FWincome Ctr 39 Des Voeux RD Central Hong Kong Phone:
+852 3110 6369
For repair instructions, log onto www.zippo.hk or
contact Zippo Asia.
© Zippo Manufacturing Company 2022.