Savant Technologies Dba Ge Lighting A Savant CLEDA199SD1 LED Lamp User Guide

: June 5, 2024
: Savant Technologies Dba Ge Lighting A Savant

Table of Contents

Savant Technologies Dba Ge Lighting A Savant CLEDA199SD1 LED Lamp
Simple DIY Setup
INSTRUCTIONS
Product features
FC RULES
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Savant Technologies Dba Ge Lighting A Savant CLEDA199SD1 LED Lamp

Simple DIY Setup

Screw or plug in your smart lights and power them on.
Download the C by GE app. Add your devices to the C by GE app.
Voila! You can now enjoy scheduling, scene setting, app, voice, and out of home control of your lights!

How to Enable Out of Home Control and Voice Control with Amazon Alexa and Google Home or Nest Hub device

Screw or Plug In and power on your smart lights.
Download the C by GE app
Enable voice control by following the directions in your voice assistant’s app

CAUTION:
DO NOT USE WITH STANDARD DIMMERS, SEE

INSTRUCTIONS

NOT FOR USE IN TOTALLY ENCLOSED LUMINAIRES
SUITABLE FOR DAMP LOCATIONS
THIS DEVICE IS NOT INTENDED FOR USE WITH EMERGENCY EXITS

Only use the control provided with or specified by these instructions to control this lamp. This lamp will not operate properly when connected to a standard (incandescent) dimmer or dimming control.

GE Connected

GE Connected A19 CLEDA199SD1, input 120Vac, frequency was 60Hz, high efficiency, safety & stability output. Use Bluetooth 4.2 and Wi-Fi 2.4G Hz chip technology to realize the far distance control. Through the APP to control the PWM signal to dim and even control the switch on & off of the bulb.

Product features

Controlled by Bluetooth 4.2 and Wi-Fi 2.4G to realize the far distance control.
CCT range is 2000K-7000K, default CCT is 2700K.
With advanced chips to make sure the bulb with high efficiency, low consumption and stability.
Internal constant current output to make sure the high power conversion efficiency and stability output.

Product Name	LED LAMP
Brand Name	GE

Model No.

Bluetooth

|

40

Channel Separation

Bluetooth

|

2MHz

Type of Modulation

Bluetooth

|

GFSK

Data Rate

Bluetooth

|

1Mbps(GFSK)

FC RULES

For additional help, regulatory and safety Information, please go to: Federal Communications Commission (FCC) Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.

The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

FCC radiation exposure

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

this device may not cause interference, and
this device must accept any interference, including interference that may cause undesired operation of the device.

Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20 cm between the radiator & your body.