NEXIGO S20 Pro Enhanced Charging Dock with LED Light User Guide
- June 16, 2024
- NEXIGO
Table of Contents
User Guide Enhanced Charging Dock
With Magnetic Charging Connection for Quest 2
S20 Pro
SUPPORT
https://bit.ly/quest-support-u
For FAQs, support videos and detailed user manual, please vist: nexigo.com/support.
PRODUCT OVERVIEW
1. Charging Base
3. Right/Left Controller Charging Slots
4. Headset Cable Power Port
5. USB-C Power Input Port
6. USB-A Power Output Port
2. Right/Left Controller
Charging Indicators
7. Cable Clip
8. Headset Support| 9. Elite Strap Support
10. Support Column
11. Magnetic USB-C Connector
12. Magnetic Charging Cable
13. Replacement Magnetic Battery Covers
14. Rechargeable Batteries
15. Magnetic USB-C
Connector Removal Tool
16. 5V 4A Power Adapter
17. Touch Control Area
for Headset Charging Indicator
---|---
ASSEMBLY INSTRUCTIONS
Peel off the tape backing from the Cable Clip. Attach the Cable Clip to the Headset Support. Slide the combined Headset Support onto the Support Column. Insert the Support Column to the Charging Base. Remove the Magnetic USB-C Connector from the Magnetic Charging Cable. Insert the USB-A end of the Magnetic Charging Cable into the Charging Base and put the magnetic end into the Cable Clip. Insert the Magnetic USB-C Connector into the charging port of your Headset/Elite Strap. Place the headset onto the Headset Support and connect the Magnetic Charging Cable. Remove the original battery covers and batteries from controllers. Install the provided Rechargeable Battery with correct polarity, then close the provided Replacement Battery Cover. Place the controllers into the Controller Charging Slots. Connect the charging dock to the power supply using the 5V 4A Power Adapter.
Notes:
-
Only use the provided charging cable, power adapter, batteries, and other accessories that the package comes with to power the unit. Using any other power adapter or cables may cause damage to the unit.
-
Do not place the battery on any metal surfaces or tables. If both metal tabs on the battery touch a metal object it will discharge the battery, potentially causing damage to the battery or the surface, and could potentially result in injury.
-
Do not stick foreign objects into any of the openings on this unit. You may damage the unit or cause harm to yourself.
-
When this unit is not in use. It is recommended that you unplug it from the power source.
-
Only use on a flat, horizontal surface.
-
The unit cannot be used and/or stored in high humidity conditions. Keep this unit dry.
-
Please use a dry cloth to clean the unit. Do not clean the unit with water or alcohol. The water or alcohol will flow into the unit along the heat dissipation holes, which will damage the unit due to the short circuit.
When cleaning, please unplug the unit first. -
To ensure longevity and lifespan of the unit, protect it from dust and do not place other consoles or objects on it.
-
If the unit is damaged, please exercise the warranty or dispose of the item. Do not attempt to open and repair it independently.
-
Keep away from small children due to potential shock hazards.
-
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
Specifications
USB-C Input | 5V ****4A |
---|---|
USB-A Output | 5V ****400mA |
Magnetic USB-C Output | ≤ 2000mA |
Controller Charging Port Output | ≤ 800mA x 2 |
Total Charging Time | Approx. 2.5 hours |
Rechargeable Battery Capacity | 1850mAh x 2 |
FCC Requirement
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>