VIXEN GO VGW0216-100K Hidden Flat Wire 2 Conductor 16 Gauge Paintable Cable User Manual
- June 1, 2024
- VIXEN GO
Table of Contents
VIXEN GO VGW0216-100K Hidden Flat Wire 2 Conductor 16 Gauge Paintable
Cable
Specifications
- 16AWG 2-Conductor Ultra Flat Cable (100 FT)
- Quick Connector Adapter (Terminal Block) x 4
- Maximum Voltage Rating: 36V
- Indoor Use Only
- Compatible with up to 10AWG wires
Product Usage Instructions
Safety Precautions
Always exercise caution when using sharp tools like scissors or knives.
Ensure all connections are completed before connecting to power sources.
Installation
- Prepare the installation area by ensuring it is clear of obstacles.
- Peel off the adhesive paper from one end of the flat cable and apply it to the desired surface.
- Install two terminal blocks, one at each end of the flat cable.
- Insert the flat cable into the terminal block up to the indicated stoppers.
- Connect your device’s wires to the terminal block using a flat head screwdriver.
- Screw in the terminal block and optionally secure it with screws to the surface.
- Repeat the above steps for the other end of the flat cable.
- Prime or paint the flat wire for better concealment if desired.
Frequently Asked Questions (FAQ)
-
Q: Can this flat cable be used outdoors?
A: No, we recommend indoor use only for this flat cable. -
Q: What is the maximum voltage rating for this product?
A: The maximum voltage rating is 36V. Do not exceed this value. -
Q: How many terminal blocks are included in the kit?
A: The kit includes four quick connector adapter terminal blocks.
BEFORE BEGINNING YOUR INSTALLATION
Read through the entire instruction guide before getting started with the
installation.
CONTENTS
- 16AWG 2-Conductor Ultra Flat Cable (100 FT)
- Quick Connector Adapter (Terminal Block) x 4
Only use this flat cable in low voltage electrical connections such as with LED lighting, doorbells, security cameras and speakers. Never exceed the maximum voltage rating value of 36V.
SAFETY INSTRUCTIONS
- Use safety precautions while working with scissors or sharp knives.
- Make sure to first finish all connections on the flat cable, quick connectors, etc. before connecting the line to the device or power line.
- Although this product may work well in places such as a porch or patio we recommend its use indoor only.
INSTALLATION
- Ensure full access to the location where you are planning to install the flat cable, make sure there are no furniture or other objects that will obstruct the installation area.
- Starting with one end of the strip, remove the adhesive paper (bottom layer) and start applying the flat wire to the surface where it is going to be installed. Images 1 and 2
- Once you have the strip installed you can proceed to install the terminals. Two terminal blocks are needed, one for each end. Two extra terminal blocks are included in this kit for multiple projects.
- Open the terminal block and with the door half way opened start inserting the flat cable thought the opening between the door and the bottom of the terminal block. There are stoppers inside the terminal block that will indicate how far the strip must be inserted (about 1/2″). Images 3and 4
- Using a flat head screwdriver, unscrew both screws and connect your device’s wires to the terminal block, then tighten the screws. This terminal is compatible with up to 10AWG wires. Image 5
- Before closing the terminal block, you may choose to secure it to the surface using two screws (not supplied), then close the terminal door. Images 6, 7 and 8
- Repeat above steps on the other end of the strip.
- You can proceed to prime or paint the flat wire for maximum concealment. Image 9
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>