Alphacool Eisblock XPX PRO Aurora Light CPU Water Block Instruction Manual
- June 9, 2024
- ALPHACOOL
Table of Contents
- Eisblock XPX PRO Aurora Light CPU Water Block
- Accessories
- Alphacool Eisblock XPX Pro Aurora Light – Acryl
- Alphacool Eisblock XPX Pro 1U
- Preparation Only XPX Pro 1U
- LGA 2066 Mounting
- TR4 / sTRX4 / sWRX8 / SP3 Mounting
- AM4 / AM5 Mounting
- LGA 4189 Mounting Only XPX Pro 1U
- Digital RGB connection
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Eisblock XPX PRO Aurora Light CPU Water Block
Instruction Manual
Eisblock XPX PRO
Eisblock XPX PRO Aurora Light CPU Water Block
Read the safety instructions before starting the installation.
https://www.alphacool.com/download/SAFETY%20INSTRUCTIONS.pdf
NOTE
All Alphacool Eisblock XPX PRO CPU coolers are mounted identically on the CPU
socket.
In the event of deviations, this is explicitly stated in these Manuals.
Accessories
Measurement
Alphacool Eisblock XPX Pro Aurora Light – Acryl
Alphacool Eisblock XPX Aurora Pro – Acryl Black
Alphacool Eisblock XPX Aurora Pro – Acryl Chrome
Size in mm
Alphacool Eisblock XPX Pro 1U
Size in mm
Size in mm
Preparation Only XPX Pro 1U
Select the suitable connection options. All connections with a max. diameter of 18mm are compatible.
You can use each inlet and outlet, all IN and OUT can be combined with each
other. Screw in the screw caps with the enclosed tool.
Preparation Remove the protective film on
the cooler plate.
After you have dismantled your old cooler clean the hardware first:
- Remove residues of the thermal paste from the CPU.
- Use a cloth or cotton swab to help. With isopropanol alcohol, you can also remove dried heat-conducting paste.
- Apply a pea-sized blob of thermal paste to the CPU.
- Spread the paste with the aid of a plastic strip or similar to form an even, thin layer (<0,5mm layer thickness).
LGA 2066 Mounting
Do not use tools, hand tighten only!
- Select the appropriate bracket and plug it together.
- Screw the LGA 2066 bolts into the socket. Place the cooler with the bracket on the socket and fix it with the compression springs and nuts.
LGA 1700 Mounting
Do not use tools, hand tighten only!
- Select the appropriate Bracket and plug it together.
- Remove the protective film from the backplate.
- Fix the backplate to the back of the mainboard with the adhesive strips. Insert the LGA 1700 screws through the pressure springs, washers and the holder. Then mount
everything on the socket.
LGA 115x Mounting
LGA 1200 Mounting
Do not use tools, hand tighten only!
- Select the appropriate Bracket and plug it together.
- Remove the protective film from the backplate.
- Fix the backplate to the back of the mainboard with the adhesive strips. Insert the LGA 115x / 1700 screws through the pressure springs, washers and the holder. Then
mount everything on the socket.
LGA 3647 Mounting
- Select the appropriate bracket and plug it together.
- Place the cooler with the bracket on the socket and fix it with the 3647 nuts. First screw in the nuts in the outer corners. Then everything is mounted on the socket.
TR4 / sTRX4 / sWRX8 / SP3 Mounting
Do not use tools, hand tighten only!
- Select the appropriate bracket and plug it together.
- Screw the TR4 / sTRX4 / sWRX8 / SP3 bolts into the base. Place the cooler with the bracket on the socket and fix it with the compression springs and nuts.
AM4 / AM5 Mounting
Do not use tools, hand tighten only!
- Select the appropriate bracket and plug it together.
- The AM4 / AM5 screws are inserted through the pressure springs, washers and the holder. Then everything is mounted on the socket.
LGA 4189 Mounting Only XPX Pro 1U
- Select the appropriate bracket and plug it together.
- The AM4 screws are inserted through the pressure springs, washers and the holder and fixed with the M4 nut. Then everything is mounted on the socket.
Digital RGB connection
To control the digital – RGB lighting,
connect the included adapter to the 3 – pin female connector and plug it to a
digital – RGB controller (e.g. Alphacool Aurora Eiscontrol,
Art.: 15360, not included). You can connect additional digital – RGB LEDs to
the remaining 3 – pin male connector.
Alphacool International GmbH
Marienberger Str. 1
38122 Braunschweig
Germany
Support: +49 (0) 531 28874 – 0
Fax: +49 (0) 531 28874 – 22
E-Mail: info@alphacool.com
https://www.alphacool.com
General Managers: Andreas Rudnicki, Fabian Noelte
WEEE-Reg.-Nr.: DE 54464644
Trade Register: Amtsgericht Braunschweig HRB 202390
VAT.ID.Nr.: DE270458421
Tax number: 13/207/02047
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>