Netac TW04G Wireless Earbuds Instructions
- July 22, 2024
- Netac
Table of Contents
TW04G Wireless Earbuds
“`html
Specifications
- Model: TW04G
- Dimensions: 77mm x 585mm
- Weight: 128g
Product Information
The Netac TW04G Wireless Earbuds are designed to provide
high-quality sound and convenient wireless connectivity for your
listening needs. With a sleek design and user-friendly features,
these earbuds are perfect for on-the-go use.
Product Usage Instructions
Manual Startup
To manually start up the earbuds, press and hold the MFB button
on the left and right headphones simultaneously for about 5
seconds. You will hear a beep indicating that the device is turned
on.
Auto Startup
The earbuds can also be set to automatically start up. Please
refer to the user manual for specific instructions on how to enable
this feature.
Manual Shutdown
To manually shut down the earbuds, press and hold the MFB button
on both the left and right earbuds for about 5 seconds. You will
hear a beep confirming that the device has been turned off.
Auto Shutdown
The earbuds can also be set to automatically shut down. Please
refer to the user manual for specific instructions on how to enable
this feature.
FAQ
Q: What should I do when the earbud battery is low?
A: When you hear a warning tone indicating low battery, promptly
place the earbuds into the charging case to recharge them.
Q: How do I clear the TWS pairing records?
A: If the earbuds are not connected, hold the MFB button on both
left and right earbuds for 5 seconds to clear the TWS pairing and
device pairing records.
Q: What happens if I encounter interference while using the
earbuds?
A: The device complies with FCC regulations and is designed to
handle interference. If you experience any issues, please refer to
the user manual for troubleshooting steps.
“`
TW04G77mm x 585mm 128g
TW04G
Wireless Earbuds Instructions
MFB3
MFB5 .TWS
Netac TW04G
earbuds
203138 10 400-105-5505 www.netac.com.cn Beijing Netac Innovation Technology Development Co.,Ltd. Location:138-1-3 No.20,Yongan Road,Mentougou District,Beijing,China Netac Technology Co.,Ltd. Location:Netac Building,Number 6 High-tech South St,Nanshan District, Shenzhen,P.R.China 518057 Web:www.netac.com
Manual startup
Auto startup
Press and hold the MFB button on the left and right headphones for about 5 seconds to turn off the device, accompanied by a beep. (When Left and right earbuds are connect, Long press L/R earbud to turn off the related earbud, the another earbud still works normally)
Manual shutdown
Auto shutdown
Netac TW04G
5MFB TWS
,
5
:TW04G :40mAh :400mAh :5.5H() +22H( :1.5H :49±5g :13mm :DC5V 450mA
,
SN
When the earbuds are not connected, hold left and right earbuds MFB button 5
seconds to clear the TWS pairing and device pairing records.
Hold on left and right ear buds 5s
EARBUDS
When the earbud battery is low with warning tone. Please put it into the charge case to charge it in time.
earbuds
Model:TW04G Earbud Battery:40mAh Charging Case:400mAh Play Time:5.5H(Earbuds) +22H(Charging Case Charging Time:1.5H Product Weight:49±5g Speaker Unit:13mm Input:DC5V 450mA
earbuds
matters needing attention
Please store and use this product in normal temperature environment; Do not
expose this product to rain or humid environment for a long time; Do not throw
it to avoid product damage caused by falling; Do not disassemble, repair or
transform this product by yourself; Please use the power charger with rated
voltage to charge; Unauthorized disassembly will invalidate the warranty. The
batteries in the charging stand and earphone are non replaceable batteries Do
not expose to such conditions as sunlight, fire or similar overheating
FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference. (2) This device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures: -Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver. -Connect the
equipment into an outlet on a circuit different from that to which the
receiver is connected. -Consult the dealer or an experienced radio/TV
technician for help.
FCC Caution This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures: -Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver. -Connect the
equipment into an outlet on a circuit different from that to which the
receiver is connected. -Consult the dealer or an experienced radio/TV
technician for help.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>