alphacool RTX 4070Ti Eisblock Aurora Ventus with Backplate Instruction Manual

June 1, 2024
ALPHACOOL

Instruction Manualalphacool RTX 4070Ti Eisblock Aurora Ventus with
Backplate Alphacool
RTX 4070Ti ROG Strix 12G Gaming

RTX 4070Ti Eisblock Aurora Ventus with Backplate

https://www.alphacool.com/m/safety.pdf

Safety instructions
Digital guide

https://www.alphacool.com/m/?acg=1055

Accessories

alphacool RTX 4070Ti Eisblock Aurora Ventus with Backplate -
Accessories Check compatibility and prepare graphics card
Check compatibility
Before starting the cooler assembly, compare your card with the pictures in our configurator.
To do so, visit https://www.hwconfig.com and search for your graphics card or cooler model.
For a definitiv identification, you can also compare the PCB number. The cooler was designed for a special PCB layout. Occasionally, graphics card manufacturers may revise the design of their card slightly, causing the cooler not to fit on later models. During assembly, please make sure taller parts have enough space around them and that the cooler does not damage your graphics card.
Alphacool International GmbH is not liable for assembly errors occurring due to negligence, such as selecting an incompatible cooler.

Prepare graphics card
Put the hardware on an antistatic mat. Begin dismantling the original cooler. Depending on the structure of the cooler, remove the screws at the back of the card and carefully unhook the fan connector first. If the original cooler uses thermal glue, extreme care should be taken as you can easily damage parts. Pick up all the items carefully. Next, clean the hardware of thermal paste or pad residues with a solvent (e.g. isopropanol alcohol).

Place thermal pads on cooling blockalphacool RTX 4070Ti Eisblock Aurora
Ventus with Backplate - cooling block Apply Thermal Greasealphacool RTX 4070Ti
Eisblock Aurora Ventus with Backplate - cooling block 1

Install PCB

alphacool RTX 4070Ti Eisblock Aurora Ventus with Backplate -
Install Place thermal pads on PCB backsidealphacool RTX 4070Ti Eisblock Aurora Ventus with Backplate -
backside Mount PCI bracket and backplatealphacool RTX 4070Ti Eisblock Aurora Ventus with Backplate -
Mount For the PCI bracket, use the original screws of the graphics card (2).

Connect ARGB lighting

alphacool RTX 4070Ti Eisblock Aurora Ventus with Backplate -
lighting Screw in screw plugs with the toolalphacool RTX 4070Ti Eisblock Aurora Ventus with
Backplate - plugs

Need help?
Alphacool International GmbH
Marienberger Str. 1
D-38122 Braunschweig
Germany
Support: +49 (0) 531 28874-0
Fax: +49 (0) 531 28874 – 22
E-Mail: info@alphacool.com
https://www.alphacool.com
We care!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

ALPHACOOL User Manuals

Related Manuals