Alphacool EISBLOCK AURORA ACRYL GPX-N RTX 4080 GPU Water Cooler Instructions
- June 3, 2024
- ALPHACOOL
Table of Contents
Alphacool EISBLOCK AURORA ACRYL GPX-N RTX 4080 GPU Water Cooler
Instructions
Ceck compatibility
Before starting the cooler assembly, compare your card with the pictures in our configurator. To do so, visit https://www.hwconfig.com and search for your graphics card or cooler model. For a definitiv identification, you can also compare the PCB number. The cooler was designed for a special PCB layout. Occasionally, graphics card manufacturers may revise the design of their card slightly, causing the cooler not to fit on later models. During assembly, please make sure taller parts have enough space around them and that the cooler does not damage your graphics card.
Alphacool International GmbH is not liable for assembly errors occurring due to negligence, such as selecting an incompatible cooler.
Prepare graphics card
Put the hardware on an antistatic mat. Begin dismantling the original cooler. Depending on the structure of the cooler, remove the screws at the back of the card and carefully unhook the fan connector first. If the original cooler uses thermal glue, extreme care should be taken as you can easily damage parts. Pick up all the items carefully. Next, clean the hardware of thermal paste or pad residues with a solvent (e.g. isopropanol alcohol).
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>