bticino F461 Circuit Breaker Instruction Manual
- May 15, 2024
- bticino
Table of Contents
Bticino F461 Circuit Breaker
Description
- RJ45 for Ethernet LAN 10/100 Mbit
- USB-C port: firmware update using the PC
- Not used
- User interface:
- System: on connecting the power supply it switches on orange, then off and the next time it switches on it indicates that the device is operative.
- Speed: off = not connected to the data network yellow steady ON = connected to the data network
- Link: off = not connected to the data network green steady ON = connected to the data network Green flashing = data transfer in progress
- Additional power supply (27 Vdc)
- 2 WIRES BUS for automation connection
- Restart pushbutton, briefly pres
Configuration
For device configuration and installation and for any other information, refer to the documentation that can be downloaded from the websites:
Download: Home + Project App
www.homesystems-legrandgroup.com
|
Warnings and consumer rights
Read carefully before use and keep for future reference.
Touching the units with wet hands is forbidden.
Using liquid cleaners or aerosols is forbidden.
Blocking the ventilation openings is forbidden.
Modifying the devices is forbidden.
Removing protective parts from the devices is forbidden.
Exposing the unit to water drops or splashes is forbidden.
Installing the units near heat/cold sources is forbidden.
Installing the units near harmful gases and powders is forbidden.
Fastening the units on unsuitable surfaces is forbidden.
Danger of electrical shock.
Risk of devices falling because the surface on which they are installed
collapses or inappropriate installation.
Switch the power supply OFF before any work on the system.
Remote operation may cause damage to people or property.
Caution: Installation, configuration, starting-up and maintenance must be
performed exclusively by qualified personnel.
Check that the wall installation has been carried out correctly according to
the installation instructions.
Check that the unit installation complies with the standards in force.
Connect the power supply wires as indicated.
Use only the items indicated in the technical specifications for any system
expansions.
- Warning: in case of a power failure, the device does not work and cannot be reached, any collection of personal data is interrupted.