Alphacool Eisbaer Aurora AIO CPU Water Cooler Instruction Manual
- June 3, 2024
- ALPHACOOL
Table of Contents
Alphacool Eisbaer Aurora AIO CPU Water Cooler
Read the safety instructions before starting the installation
Accessories
1x Digital-RGB adapter Only with:
- Alphacool Eisbaer (Solo) Serie
- Alphacool Eisbaer Aurora (Solo) Serie
- Alphacool Eisbaer Aurora LT (Solo) Serie.
Masurement
- Size in mm
Alphacool Eisbaer LT (Solo) series
Alphacool Eisbaer Aurora LT (Solo) series
- Size in mm
LGA 115x / 1200 / 1700 / 2066
AM4 / AM5
- Size in mm
Preparation
- Connect your connections to IN and OUT as shown. All connections with a max. diameter of 18mm are compatible.
- The fill port can be used for refilling if necessary. Screw in the screw cap with the enclosed tool.
- Remove the protective film on the cooler plate.
- After you have dismantled your old cooler clean the hardware first:
- Remove residues of the thermal paste from the CPU.
- Use a cloth or cotton swab to help. With isopropanol alcohol, you can also remove dried heat-conducting paste.
- Apply a pea-sized blob of thermal paste to the CPU.
- Spread the paste with the aid of a plastic strip or similar to form an even, thin layer (<0,5mm layer thickness).
LGA 2066 Mounting
Do not use tools, only tighten up hand-tight!
- Select the appropriate bracket and plug it together.
- The LGA 2066 screws are put through the pressure springs, washers and the holder, Then everything is mounted on the socket.
LGA 1700 Mounting
Do not use tools, only tighten up hand-tight!
- Select the appropriate Bracket and plug it together.
- Remove the protective film from the backplate.
- Fix the backplate to the back of the mainboard with the tape. The LGA 1700 screws are inserted through the pressure springs, washers and the holder. Then everything is mounted on the socket.
LGA 115x Mounting LGA 1200 Mounting
Do not use tools, only tighten up hand-tight!
- Select the appropriate Bracket and plug it together.
- Remove the protective film from the backplate.
- Fix the backplate to the back of the mainboard with the tape. The LGA 115x / 1200 screws are inserted through the pressure springs, washers and the holder. Then everything is mounted on the socket.
AM4 / AM5 Mounting
Do not use tools, only tighten up hand-tight!
- Select the appropriate bracket and plug it together.
- The AM4 / AM5 screws are put through the pressure springs, washers and the holder. Then everything is mounted on the socket.
Pump connection
Plug the 3-pin connector into a free fan connector on your mainboard.
Alphacool Eisbaer (Solo) series
The cooler has an illuminated logo. To activate it, plug the 3-pin connector into a free fan connector on your mainboard.
Digital RGB connection
To control the digital – RGB lighting, connect the included adapter to the 3 – pin female connector and plug it to a digital – RGB controller (e.g. Alphacool Aurora Eiscontrol, Art.: 15360, not included). You can connect additional digital – RGB LEDs to the remaining 3 – pin male connector. Then plug the 3-pin connector (pump connector) into a free fan connector on your mainboard.
Alphacool Eisbaer Aurora LT (Solo) series
To control the digital – RGB lighting, connect the included adapter to the 3 – pin female connector and plug it to a digital – RGB controller (e.g. Alphacool Aurora Eiscontrol, Art.: 15360, not included). You can connect additional digital – RGB LEDs to the remaining 3 – pin male connector. Then plug the 3-pin connector (pump connector) into a free fan connector on your mainboard.
Alphacool International GmbH Marienberger Str. 1 D-38122 Braunschweig Germany
Support: +49 (0) 531 28874 – 0
Fax : +49 (0) 531 28874 – 22
E-Mail: info@alphacool.com
https://www.alphacool.com
General Managers: Andreas Rudnicki, Fabian Noelte WEEE-Reg.-Nr.: DE
54464644
Trade Register : Amtsgericht Braunschweig HRB 202390 VAT.ID.Nr.:
DE270458421
Tax number : 13/207/02047