Alphacool VPP-D5 Pump Distro Plate Apex Instruction Manual
- June 1, 2024
- ALPHACOOL
Table of Contents
- Safety instructions
- Accessories
- Prepare the case
- Bring the Distro Plate into position
- Screw the Distro Plate to the case
- Configuration inlet and outlet
- Assembly example 1
- Connect ARGB lighting
- Connection pump cable
- Filling and ventilation
- Finishing touches
- Dimensions in millimeter (mm)
- CUSTOMER SUPPORT
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Alphacool VPP-D5 Pump Distro Plate Apex
Safety instructions
| Safety instructions|
---|---|---
| Digital guide|
Accessories
*Only the pre-assembled version includes the pump.
-
1x Apex Distro Plate Y60
-
1x VPP-D5 Pump*
-
2x G1/4 Plug
-
1x Plug tool
-
1x ARGB Adapter
Prepare the case
Remove side and front panel.
Bring the Distro Plate into position
Distro Plate will be mounted like the front panel.
Screw the Distro Plate to the case
Use the original screws from the case.
Configuration inlet and outlet
(Part 1)
(OUT) leads from the Distro Plate to the component.
(IN) comes back from the component to the Distro Plate.
(Part 2)
Assembly example 1
If less than 3 components are to be connected, the remaining associated inlets
and outlets must be bridged.
The assembly with three components may look as shown in the figure.
If more than 3 components are to be connected (e.g. another radiator), the
setup can look as shown.
Connect ARGB lighting
Connection pump cable
Filling and ventilation
Fill the reservoir with suitable coolant. We recommend using only our own products for this purpose.
To remove trapped air from the reservoir, sway the reservoir back and forth a little and then open a suitable port so that the air bubbles can escape from the device. When swinging, make sure that all openings are closed or in use except for the ventilation opening.
If necessary, coolant must be topped up. Then switch on the pump so that the water is distributed in the circuit. Switch the pump off again and repeat the process until all the air escapes from the reservoir.
Finishing touches
Mount the side panel.
Dimensions in millimeter (mm)
(Part 1)
(Part 2)
CUSTOMER SUPPORT
Need help?
Alphacool International GmbH
Marienberger Str. 1
D-38122 Braunschweig
Germany
Support: +49 (0) 531 28874-0
Fax: +49 (0) 531 28874 – 22
E -Mail: info@alphacool.com
https://www.alphacool.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>