POCEKT Auto Catch Lightning User Manual
- June 3, 2024
- POCEKT
Table of Contents
POCEKT Auto Catch Lightning
Pairing Connection
- Turn on your mobile Bluetooth.
- Tap the Main Menu.
- Tap Settings.
- Select Pokémon GO Plus in setting page. Pocket Auto Catch Lightning will start to pair automatically.
- Unpaired ID Green Light flashes
- Paired ID Blue Light flashes
- Waiting for pairing. When the Pokémon GO Plus icon turns on, it means the pairing is successful.
Not connected Successful connection
How to switch between Function Modes
Short press the button to switch between the two function modes.
Reset to factory settings
- Hold button
- Insert the charger cable and connect to a USB charger port.
Function Modes Description
Mode 1: Blue Light: Clear Bluetooth Pairing ID
Long press the button for 3 seconds
- Execute clearing ID Green and Red flashing
- (Please wait 11-20 seconds when clearing ID)
Clear successful
- Blue Light flashes 3 times
Clear failed
- Red Light flashes 3 times
Mode 2: Green Light: Vibration on / off
- Long press the button for 3 seconds
Vibration on
- ****Green Light flashes 3 times
Others
Power / Connection / Other status
Charge your Device
- When charging Pocket Auto Catch Lightning, 3 colors (red, green, blue) will flash repeatedly.
- When the power is full, Pocket Auto Catch Lightning will display a white light.
- When you are playing Pokémon Go, there will be no vibration.
Warning
When it is not used over a long period of time, the rechargeable battery may enter the protection mode and cannot be charged smoothly. You can activate the rechargeable battery by pressing and holding the button, then plugging and unplugging the USB charger several times until the white LED flashes, and then releasing the button. Pocket Auto Catch Lightning may fail to pair to the device because of the update of the Pokémon Go app, or the upgrade of Android and iOS. Pocket Auto Catch Lightning will time out automatically every hour, so players have to reconnect it. Pocket Auto Catch Lightning will time out every 3-5 minutes if the mobile is idle.
- Better keep it among: 20°C ~ and 45°C.
- Suggested charging temperature: 10°C ~ 35°C.
The device requires Bluetooth low-energy compatible smartphone with the Pokémon GO app installed. Compatible with iPhone 6S or higher devices with iOS Ver. 12 or higher version installed. Compatible with Android devices with 4 GB RAM or more. Bluetooth Smart (Bluetooth Ver. 4.0 or higher) capability and Android Ver. 7.0 or higher version installed. This Product is not sponsored, endorsed, or approved by Nintendo, The Pokémon Company, or Niantic.
Product Warranty
- Within one year from the purchase date, Brook offers the product warranty with normal operating circumstances and non-human damage. It includes free maintenance and returns.
- The following conditions are not included in the warranty service: natural disasters, customer-induced damage, improper operation, and repair by non-Brook authorized staff.
- Please be sure to keep both the Warranty card and the Retailer invoice. These two documents are necessary to guarantee a return.
- Product Name: ………………………………..
- Product Number: ………………………………..
- Date of Purchase: …………………………………
- Warranty Period: 1 year
- Date
- Month
- Year
If the purchase or invoice dates are incorrect or unrecognized, the warranty service is unavailable.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure conditions without restriction.
ISED Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment.
The device has been evaluated to meet general RF exposure requirements. This equipment should be installed and operated with minimum distance 0mm between the radiator & your body.