SKYDANCE V3-M Rgb Mini Led Controller Owner’s Manual
- June 9, 2024
- SKYDANCE
Table of Contents
SKYDANCE V3-M Rgb Mini Led Controller
RGB LED Mini RF Controller Model No.: V3-M, V3-M(CJ), V3-M(DJ)
3 channel constant voltage/Max 6A output/Step-less dimming/Wireless remote
control
| 
| 
---|---|---
V3-M
Cable In /Cable Out Version
|
V3-M(CJ
DC Female Jack In /4P Female Jack Out Version
|
V3-M(DJ)
DC Female Jack In /4P Female Jack Out Version
Model List
| Model | Photo | Power Connector | LED Connector |
|---|
V3-M
| 
|
Red/Black Cable 10cm
|
4-color Flat Cable 10cm
V3-M(CJ)
| 
|
Red/Black Cable 10cm
|
4-pin Flat Female Jack 10cm
V3-M(DJ)
| 
|
5.5mm DC
Female Jack
|
4-pin Flat Female Jack 10cm
Features
- 3 channel constant voltage RGB LED mini RF controller.
- 2A per channel, output connect with 5 meters RGB LED strip.
- Match with RF 2.4G single zone or multiple zone RGB/RGBW remote control.
- One RF controller accept up to 10 remote control.
- 4096 levels 0-100% dimming smoothly without any flash.
- Built in 10 dynamic mode, include jump or gradual change style.
- Auto-transmitting function: Controller automatically transmit signal to another controller with 30m control distance.
- Synchronize on multiple number of controllers.
Dimension
Technical Parameters
Input and Output
Input voltage| 12-24VDC
Output voltage| 12-24VDC
Output current| 2A/CH, Total Max. 6A
Output type| Constant voltage
Environment
Operation temperature| Ta: -30 OC ~ +55 OC
Case temperature (Max.)| T c: +85OC
IP rating| IP20
Warranty and Protection
Warranty| 5 years
Protection| Reverse polarity Over heat
Dimming data
Input signal| RF 2.4GHz
Control distance| 30m(Barrier-free space)
Dimming gray scale| 4096 (2^12) levels
Dimming range| 0 -100%
Dimming curve| Logarithmic
PWM Frequency| 500Hz (default)
Safety and EMC
EMC standard (EMC| ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
Safety standard(LVD)| EN 62368-1:2020+A11:2020
Radio Equipment(RED)| ETSI EN 300 328 V2.2.2
Certification| CE,EMC,LVD,RED
Wiring Diagram
RGB dynamic mode list
-
RGB jump
-
RGB smooth
-
6 color jump
-
6 color smooth
-
Yellow cyan purple smooth
-
RGB fade in and out
-
Red fade in and out
-
Green fade in and out
-
Blue fade in and out
-
White fade in and out
Dimming curve
Application notes
-
All the receivers in the same zone
Auto-transmitting: One receiver can
transmit the signals from the remote to another receiver within 30m, as long
as there is a receiver within 30m, the remote control distance can be
limitless.
Auto-synchronization: Multiple receivers within 30m distance can work synchronously when they are controlled by the same remote, under same dynamic mode and with same speed.
Receiver placement may offer up to 30m communication distance. Metals and other metal materials will reduce the range.
Strong signal sources such as WiFi routers and microwave ovens will affect the range.
We recommend for indoor applications that receiver placements should be no further apart than15m. -
Each receiver(one or more) in a different zone, like zone 1, 2, 3 or 4.
Malfunctions analysis & troubleshooting
| Malfunctions | Causes | Troubleshooting |
|---|
No light
|
- No power.
- Wrong connection or insecure.
|
- Check the power
- Check the connection.
Wrong color|
- Wrong connection of R/G/B wires.
|
- Reconnect R/G/B wires.
No response from the remote|
- The battery has no power.
- Beyond controllable distance.
- The controller did not match the remote.
|
- Replace battery.
- Reduce remote distance.
- Re-match the remote.
