SKYDANCE E1-D Door Sensor Switch Instruction Manual
- June 4, 2024
- SKYDANCE
Table of Contents
SKYDANCE E1-D Door Sensor Switch
Features
- Door sensor switch, connected directly to the low voltage LED strip.
- When the door open, or no obstacle ahead, the strip turn on gradually. When the door close, or obstacle ahead, the strip turn off gradually.
- Max 4A output current, max output power 96W@24V.
- Generally installed in the aluminum lamp strip housing.
- 3M paste in the bottom of the PCBA make easy installation and security.
- Low cost and high stability.
- Widely used in wardrobe lights.
Technical Parameters
Input and Output
Input voltage| 12-24VDC
Output voltage| 12-24VDC
Output power| Max. 48W@12V Max. 96W@24V
Sensor data
Detective distance| 10cm
Detevtive angle| 15-30
Safety and EMC
EMC standard (EMC)| ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
Safety standard(LVD)| EN 62368-1:2020+A11:2020
Certification| CE,EMC,LVD
Warranty and Protection
Warranty| 5 years
Protection| Reverse Polarity
Environment|
---|---
Operation temperature| Ta: -30OC ~ +55OC
Dimension
Installation attention
- Cut a hole in size L7 x H5mm on the side of the aluminum profile.
- Put mini sensor switch into profiles when power is off, put the detector head to the hole, detector head should face to the objects.
- Pay attention to power input and LED output polarity.
Wiring Diagram
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>