SKYDANCE SS-B RF Smart AC Switch & Push Switch Instruction Manual

SKYDANCE SS-B RF Smart AC Switch & Push Switch

Model No.: SS-B

Features

• RF smart switch with relay output, without dimming function.
• To switch single color LED lamps, traditional incandescent and halogen lights.
• Compatibility with RF 2.4G dimming remote control.
• Connect with external push switch optional.
• Easy to be placed in standard wall junction box behind a push switch.

Technical Parameters

Mechanical Structures and Installations

Typical Wall Junction Box Mounting

Wiring diagram

Note:

1. The upper Push-key input port can not connect any AC or DC power supply, otherwise, the product will be damaged.
2. If output connect with capacitive or inductive load, the maximum output current only up to 1.5A. If output connect with resistive load, the maximum output current may up to 5A.
3. An additional AC relay or contactor is needed when total input current of the load (such as pump) is higher than 1.5A or inrush current is greater than 15A.

Match Remote Control (two match ways

End user can choose the suitable match/delete ways. Two options are offered for selection

Use the controller’s Match key

Match:
Short press match key, immediately press on/off key (single zone remote) or zone key (multiple zone remote) of the remote.

Delete:
Press and hold match key for 5s to delete all match, The light blinks 5 times means all matched remotes were deleted.

Use Power Restart

Match:
Switch off the power, then switch on power, repeat again. Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 3 times on the remote.

Delete:
Switch off the power, then switch on power repeat again. Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 5 times on the remote

Available RF remote

Application notes

All the receivers in the same zone.

Auto-transmitting : One receiver can transmit the signals from the remote to another receiver within 30m, as long as there is a receiver within 30m, the remote control distance can be extended.

Auto-synchronization : Multiple receivers within 30m distance can work synchronously when they are controlled by the same remote. Receiver placement may offer up to 30m communication distance. Metals and other metal materials will reduce the range. Strong signal sources such as WiFi routers and microwave ovens will affect the range. We recommend for indoor applications that receiver placements should be no further apart than15m

Each receiver(one or more) in a different zone, like zone 1, 2, 3 or 4.

Documents / Resources

| SKYDANCE SS-B RF Smart AC Switch & Push Switch [pdf] Instruction Manual
SS-B, RF Smart AC Switch Push Switch, Switch Push Switch, RF Smart Push Switch, Push Switch, AC Switch, Switch
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>