SKYDANCE RS10 8 Zone 8 Scene RF Remote Controller User Manual
- June 4, 2024
- SKYDANCE
Table of Contents
8 Zone 8 Scene RF Remote Controller
Model No.: RS10
8 Zone/8 scene/Touch color wheel/Wireless remote 30m distance/AAAx2
battery/Magnet stuck fix
Features
- 8 zones 8 scene RF 2.4G remote.
- Apply to a single color, dual color, RGB, RGBW or RGB+CCT RF LED controller.
- Ultra-sensitive color adjustment touch wheel.
- Each remote zone can match one or more receivers.
- AAAx2 b battery powered.
- Operate with LED indicator light.
- Magnet on the back which can be stuck on the back holder.
Technical Parameters
Input and Output
| Output signal | RF(2.4GHz) |
|---|---|
| Working voltage | 3VDC(AAAx2) |
| Working current | ＜5mA |
| Standby current | ＜10μA |
| Standby time | 1 year |
| Remote distance | 30m(Barrier-free space) |
Environment
| Operation temperature | Ta: -30°C ~ +55°C |
|---|---|
| IP rating | IP20 |
Safety and EMC
EMC standard (EMC)| ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
---|---
Safety standard(LVD)| EN 62368-1:2020+A11:2020
Radio Equipment(RED)| ETSI EN 300 328 V2.2.2
Certification| CE,EMC,LVD,RED
Warranty
| Warranty | 5 years |
|---|
Weight
| Gross weight | 78g |
|---|---|
| Net weight | 111g |
Mechanical Structures and Installations
To fix the remote, three options are offered for selection
Option 1: stuck the remote on any metal surfaces directly.
Option 2: fix the remote’ back holder on the wall with two screws.
Option 3: adhere the remote’ back holder to the wall with a paster.
Operation
- When turning on the light, the indicator displays blue. when turning off the light, the indicator display red.
- When touching the color wheel, the indicator will display the same color.
- When the press or touch operation is invalid (If the light is off), the indicator display red.
- To extend battery life, no touch or press key operation after a few seconds, the touch wheel will enter the sleep state, you need press any key to make touch wheel quit sleep state.
Match Remote Control (two match ways)
The end users can choose suitable match/delete ways. Two options are offered
for selection:
| Use the controller’s Match key | Use Power Restart |
|---|
Match:
Short press the match key and immediately press the zone key of the remote.
The LED indicator fast flash a few times means the match is successful.
Delete:
Press and hold the match key for 5s to delete all match, The LED indicator
fast flash a few times means all matched remotes were deleted.| Match:
Switch off the power, then switch on the power, and repeat again. Immediately
short press the zone key 3 times on the remote. The light blinks 3 times means
the match is successful.
Delete:
Switch off the power, then switch on the power, and repeat again. Immediately
short press the zone key 5 times on the remote. The light blinks 5 times means
all matched remotes were deleted.
Key function
Each zone can match single color, dual color(WW/CW), RGB, RGBW, or RGB+CCT(WW/CW) RF LED controller.
For example, the long press key for 2s will set zone 1 as RGB light type. When
the remote type change OK, the green indicator goes on for a long time.
Long press key + any of the five keys for 2s will set all 8 zones to the same
light type correspondingly.
Touch to change current zone brightness, color temperature, or RGB color.
Press BRT, CCT, or RGB key to switch between the brightness wheel, color
temperature wheel, or RGB color wheel.
When it is the brightness wheel, touch it to change the brightness.
When it is the color temperature wheel, touch it to change the color
temperature.
When it is an RGB color wheel, touch to change the RGB color.
Adjust brightness, at the same time, the multi-color wheel becomes the brightness wheel. short press 10 levels, long press 2s get max or min brightness.
Adjust color temperature, at the same time, the multi-color wheel becomes the
color temperature wheel.
For dual color or RGB+CCT(WW/CW), adjust the color temperature by WW/CW
channel, short press 11 levels, and long press adjust WW+CW brightness
continuously.
For RGB, adjust the color temperature by mixing the R/G/B channel,11 levels.
For RGBW, adjust the color temperature by adjusting W channel brightness, by 11 levels.
The short press gets 24 kinds of static RGB color, at the same time, the multi-color wheel becomes an RGB color wheel.
: Short press switch dynamic mode built-in controller, long press 2s Mode+ run mode cycle, long press 2s Mode- run the first mode.
: For dynamic RGB mode, adjust dynamic mode speed, short press 10 levels, long press 2s get the fastest / slowest speed. For static RGB color, adjust saturation, namely change current static RGB color to mixed white slowly, short press 11 levels, long press 1-6s for continuous 256 levels adjustment.
: When 1-8 key is zone function,
Short press select and turn on zone light, long press 2s turn off zone light.
When 1-8 key is scene function,
Short press recalls the scene, long press 2s save the current light state into
1-8.
The LED indicator display green longer when saving OK. 8 zone recall or save
synchronously.
: Short press to select zone 1-8 sequentially, at the same time set 1-8 key as
a zone function key.
The LED indicator will display blue or red when 1-8 key is a zone on/off
operation.
: Short press to recall scenes 1-8 sequentially, at the same time set 1-8 key
as a scene function key.
The LED indicator will display green when 1-8 key is scene recall/save
operation.
: Short press turn on/off all zone or scene lights.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>