ROBENS 690361 Conival 3in1 Pump Instruction Manual
- May 15, 2024
- ROBENS
Table of Contents
ROBENS 690361 Conival 3in1 Pump
Specifications:
- Model: 690361 / SB-9850
- 3-in-1 pump with lantern function
- USB-C charging input
- USB-A powerbank output
- Solar panel for charging
- Includes 6 pcs. valve adapters
Product Usage Instructions
Installation & Charging:
- The rechargeable 3-in-1 pump can be charged using the included charging cable.
- Ensure to fully charge the battery before the first use.
- Remove the charge port cover and connect the USB-C male plug to charge the device.
Pump Function:
- Select a suitable valve adapter and attach it to the inflation or deflation port on the pump.
- Connect the pump with the adapter to the valve on the item you wish to inflate/deflate.
- To activate high mode, press the on/off switch for the pump twice in a row. This mode is ideal for faster inflation.
- Activate low mode by pressing and holding the on/off switch to conserve battery and inflate smaller items.
- Turn off the pump by toggling through the mode cycles.
- When deflating, pinch the valve to allow air to escape.
Lantern Function:
- To turn on the lantern, press the on/off button switch marked with a sun symbol.
- The battery indicator will display the current battery capacity.
FAQ:
-
Q: Can the pump be used continuously for long periods?
A: No, the pump is not designed for continuous use exceeding 10 minutes. Extended operation can cause overheating and damage. -
Q: What should I do if the recommended pressure of an item is exceeded?
A: Carefully follow the instructions on the item being inflated and never exceed the recommended pressures to avoid injury. -
Q: Is it safe for children to use this product?
A: This appliance can be used by children from the age of 8 under supervision. Ensure safety guidelines are followed at all times.
ROBENS CONIVAL 3IN1 PUMP
Read this manual before using the product. Keep the manual for future
reference.
Content
- On/off switch for pump
- On/off switch for lantern
- Charge port cover
- Inflation port
- Deflation port
- Lantern
- Metal hanger
- Battery indicator
- USB-C charging input
- USB-A powerbank output
- Solar panel
- Charging cable
- USB-C male plug
- USB-A male plug
- 6 pcs. valve adapters
WARNINGS
-
This pump is intended to inflate inflatable items such as air mattresses, self-inflating mats etc., and is not designed for continuous use exceeding 10 minutes. Extended operation can overheat and damage the pump.
Do not exceed 10 minutes of continuous operation
Take a 20-minute break before resuming inflation -
Carefully follow the instructions on the item you are inflating. Never exceed the recommended pressures. Bursting items can cause serious injury.
-
Never leave the air pump unattended while in use.
-
Never allow sand, small rocks, etc. to enter the inflation or deflation port while in use.
-
Never look into or point the inflate opening toward your eyes while the pump is operating.
-
Never place your hand or fingers into the inflation or deflation opening at any time.
-
Never attempt to disassemble or close to the openings while the air pump is operating.
-
The sound pressure level is approximately 80 dB (A).
-
This appliance can be used by children from the age of 8 and people with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be done by children without supervision.
-
The pump contains non-replaceable batteries.
-
Do not stare into the light source.
-
Do not modify the product.
-
The product is only to be used with the charging cable provided.
INSTALLATION & USE
- The rechargeable 3in1 pump can be charged by the included charging cable (12).
- Fully charge the battery before first use.
- Remove the charge port cover (3), and connect the USB-C male plug (13) to the USB-C charging input (9) on the 3in1 Pump.
- Plug the USB-A male plug (14) into a suitable power source (5VDC, 2A).
- A full charge from 0 – 100% takes app. 3 hours (5VDC, 2A).
- When charging the battery indicator (8) will show the current battery level (solid dots) and charging status (blinking dots). 4 solid dots equals a fully charged battery.
- The 3in1 Pump can also be charged using the integrated solar panel (11).
- Place it outside with the solar panel facing upwards. Ideally positioned perpendicular to the sun, so that the suns rays hits the panels on a 90° angle.
Pump function:
-
Select a suitable valve adapter (15) and attach it to the inflation port (4), or deflation port (5) on the 3in1 pump, depending on whether you wish to inflate or deflate an item.
-
Remove the cover on the item you would like to inflate/deflate, and connect the 3in1 pump with adapter to the valve on the item.
-
Activate high mode:
With the pump and adapter connected to the valve on the item, press the on/off switch for pump (1) twice in a row. This will activate the high mode (4.5kPa, 300L/min). -
The battery indicator (8) will turn on, and indicate that the pump is running, as well as the current battery capacity from 1-4 dots.
Activate low mode: -
Press and hold the on/off switch for pump (1) to activate the low mode (2.5kPa, 150L/min). Low mode is ideal for inflating smaller items and to prolong battery capacity.
-
The pump is turned off by toggling through the pump mode cycles until the end.
-
When deflating it might be necessary to pinch the valve with your fingers to open the flapped inside the valve to allow air to escape.
-
To inflate a Robens self-inflating mat or airbed use the grey Robens FHF valve adapter with an “R”.
Lantern function:
- The lantern is turned on by pressing the on/off button switch for lantern (2) marked with a sun symbol.
- The battery indicator (8) will turn on, and indicate that the lantern is on, as well as the current battery capacity from 1-4 dots.
- Press the power button (2) additional times to toggle through the three different light modes:
- Low: 50 lumen
- Mid: 100 lumen
- High: 150 lumen
- The lantern is turned off by toggling through the light modes.
- The lantern can be used hanging, standing or as a handheld flashlight.
- The lantern can be used as a work light while using the pump.
Powerbank function:
Lamp can also be used as a power bank to charge phones, gadgets etc.
- Connect the USB-A male plug (14) to the USB-A powerbank output (10) on the 3in1 Pump.
- Connect the USB-C male plug (13) to the appliance you would like to charge.
CLEANING & MAINTENANCE
The pump can be cleaned with water and a damp rag. Do not use corrosive liquids to clean the pump as this might damage the product.
LIGHT SOURCE: LED
Light source and control gear is not replaceable. This would introduce weak
points in the construction, that could reduce the lifetime of the product.
DISASSEMBLY & DISPOSAL
- If the product is no longer functional, follow the below instructions.
- Disconnect the pump from any power source before starting the disassembly process.
- Break unit body using a hammer or use a sharp tool along the joint of the pump to separate the parts. Remember to wear eye protection.
- Disconnect and cut the wires, and dispose of the pump unit, PCB board, charging cable, solar panel and wires as electronic waste.
- Dispose of batteries as battery waste.
- Dispose of plastic body and nozzles as plastic waste.
- Dispose of metal components such as hanger & screws as metal waste.
- All according to local regulations.
TECHNICAL DATA
- Input (USB-C): 5V , 2A
- Input (USB-A): 5V , 2A
- Battery: 3.7V , 4000mAh
- LED light: 4V , 3.5W
- Inflation pressure: 2.5kPa – 4.5kPa
- Degree of protection: The product is water resistant to IPX4
- Class 3 appliance
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>