SKYDANCE V3 RGB-CCT-Dimming 3 Channel LED RF Controller Instruction Manual
- June 4, 2024
- SKYDANCE
Table of Contents
RGB/CCT/Dimming 3 Channel LED RF Controller
Model No.: V3
3 Channels/Step-less dimming/Wireless remote control/Auto- transmitting/Synchronize
Features
- Match with RF 2.4G single zone or multiple zone single color, dual color, and RGB/RGBW remote control.
- One RF controller accepts up to 10 remote control.
- 4096 levels 0-100% dimming smoothly without any flash.
- When using RGB light, built in 10 dynamic modes, including jump or gradual change style.
- Auto-transmitting function: Controller automatically transmits a signal to another controller with 30m control distance.
- Synchronize on multiple controllers.
- Light on/off fade time 3s selectable.
Technical Parameters
Input and Output
| Input voltage | 12-24VDC |
|---|---|
| Input current | 12.5A |
| Output voltage | 3 x (12-24)VDC |
| Output current | 3CH,4A/CH |
| Output power | 144-288W(12-24V |
| Output type | Constant voltage |
Environment
| Operation temperature | Ta: -30°C ~ +55C |
|---|---|
| Case temperature (Max.) | T c: +85°C |
| IP rating | IP20 |
Warranty and Protection
| Warranty | 5 years |
|---|---|
| Protection | Reverse polarity Short circuit |
Dimming data
| Input signal | RF 2.4GHz |
|---|---|
| Control distance | 30m(Barrier-free space) |
| Dimming grayscale | 4096 (2^12) levels |
| Dimming range | 0 -100% |
| Dimming curve | Logarithmic |
| PWM Frequency | 1000Hz (default) |
Safety and EMC
EMC standard (EMC)| ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
---|---
Safety standard(LVD)| EN 62368-1:2020+A11:2020
Radio Equipment(RED)| ETSI EN 300 328 V2.2.2
Certification| CE,EMC,LVD,RED
Weight
| Gross weight | 0.038kg |
|---|---|
| Net weight | 0.049kg |
Mechanical Structures and Installations
Wiring Diagram
Match Remote Control (two match ways)
The end users can choose suitable match/delete ways. Two options are offered for selection:
Use the controller’s Match key
Match:
Short press the match key, and immediately press the on/off key (single zone
remote) or zone key (multiple zones remote) on the remote. The LED indicator
fast flash a few times means the match is successful.
Delete:
Press and hold the match key for 5s to delete all match, The LED indicator
fast flash a few times means all matched remotes were deleted.
Use Power Restart
Match:
Switch off the power of the receiver, then switch on the power.
Repeat again.
An immediately short press on/off key (single zone remote) or zone key
(multiple zones remote) 3 times on the remote. The light blinks 3 times means
the match is successful.
Delete:
Switch off the power of the receiver, then switch on the power.
Repeat again.
An immediately short press on/off key (single zone remote) or zone key
(multiple zones remote) 5 times on the remote. The light blinks 5 times means
all matched remotes were deleted.
Application notes
-
All the receivers are in the same zone.
Auto-transmitting: One
receiver can transmit the signals from the remote to another receiver within
30m, as long as there is a receiver within 30m, the remote control distance
can be extended.
Auto-synchronization: Multiple receivers within a 30m distance can work synchronously when they are controlled by the same remote, under the same dynamic mode, and with the same speed.
Receiver placement may offer up to 30m communication distance. Metals and other metal materials will reduce the range. Strong signal sources such as WiFi routers and microwave ovens will affect the range.
We recommend for indoor applications that receiver placements should be no further apart than15m. -
Each receiver(one or more) is in a different zone, like zone 1, 2, 3, or 4.
Light on/off fade time
Long press match key 5s, then short press match key 3 times, the light on/off
time will be set to 3s, and the indicator light blinks 3 times. Long press
match key 10s, restore factory default parameter, the light on/off time also
restore to 0.5s.
RGB Dynamic mode list
| No. | Name | No. | Name |
|---|---|---|---|
| 1 | RGB jump | 6 | RGB fade in and out |
| 2 | RGB smooth | 7 | Red fade in and out |
| 3 | 6 color jump | 8 | Green fade in and out |
| 4 | 6 color smooth | 9 | Blue fade in and out |
| 5 | Yellow cyan purple smooth | 10 | White fade in and out |
Dual color control
CH1=Warm white LED
CH2=Cool white LED
Each channel can supply up to 96W(@24V) and the white balance can be
controlled as such:
| Color temperature | Cool white | Neutral white | Warm white |
|---|---|---|---|
| Power distribution | CH1=0W,CH2=96W | CH1=48W,CH2=48W | CH1=96W,CH2=0W |
Malfunctions analysis & troubleshooting
| Malfunctions | Causes | Troubleshooting |
|---|---|---|
| No light | 1.No power. | |
| 2. Wrong connection or insecure. | 1. Check the power. |
2. Check the connection.
Wrong color| 1. Wrong connection of R/G/B wires.| 1. Reconnect R/G/B wires.
Uneven intensity between front and
rear with voltage drop,| 1. Output cable is too long.
2. Wire diameter is too small.
3. Overload beyond power supply capability.
4. Overload beyond controller capability.| 1. Reduce cable or loop supply.
2. Change wider wire.
3. Replace the higher power supply.
4. Add power repeater.
No response from the remote| 1. The battery has no power.
2. Beyond controllable distance
3. The controller did not match the remote.| 1. Replace the battery.
2. Reduce remote distance.
3. Re-match the remote.