SKYDANCE WZ1 2CH LED Controller Mechanical Structures User Manual
- June 4, 2024
- SKYDANCE
Table of Contents
- Features
- Technical Parameters
- Mechanical Structures and Installations
- System wiring
- Wiring Diagram
- Push Dim
- Tuya APP network connection
- Tuya APP interface
- WZ1 match remote control (Optional)
- WZ1 works as a ZigBee-RF converter to match RF LED controller or dimming
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
WZ1 2CH LED Controller Mechanical Structures
User Manual
Model No.: WZ1
Tuya APP cloud control Philips HUE control//Voice control /2 Channels/Push-
Dim/DC power socket input
Features
- Used for controlling single color or color temperature LED strip.
- DC power socket input and 2-channel constant voltage output.
- Tuya APP cloud control supports on/off, color temperature and brightness adjustment, delay turn on/off light, timer run, scene edit, and music play functions.
- Philips HUE APP control by connecting with Philips HUE bridge.
- Voice control, support amazon ECHO and TmallGenie smart speaker.
- Match with RF 2.4G remote control optional.
- The user needs to set the light type by pressing the key before the Tuya APP network connection and match the RF remote of the same light type.
- Each WZ1 controller can also work as a ZigBee-RF converter, then use Tuya APP to control one or more RF LED controllers or RF LED dimming drivers synchronously.
- Connect with external push switch to achieve on/off and 0-100% dimming function.
- Light on/off fade time 3s selectable.
Technical Parameters
Input and Output
| Input voltage | 12-36VDC |
|---|---|
| Input current | 10.5A |
| Output voltage | 2 x (12-36)VDC |
| Output current | 2CH,5A/CH |
| Output power | 2 x (60-180)W |
| Output type | Constant voltage |
Dimming data
| Input signal | Tuya APP + RF + Push Dim |
|---|---|
| Control distance | 30m(Barrier-free space) |
| Dimming grayscale | 4096 (2^12) levels |
| Dimming range | 0 -100% |
| Dimming curve | Logarithmic |
| PWM Frequency | 2000Hz (default) |
Safety and EMC
EMC standard (EMC)| ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
---|---
Safety standard(LVD)| EN 62368-1:2020+A11:2020
Radio Equipment(RED)| ETSI EN 300 328 V2.2.2
Certification| CE,EMC,LVD,RED
Environment
| Operation temperature | Ta: -30°C ∼ +55°C |
|---|---|
| Case temperature (Max.) | Tc: +85°C |
| IP rating | IP20 |
Warranty and Protection
| Warranty | 5 years |
|---|---|
| Protection | Reverse polarity |
Over-heat
Short circuit
Mechanical Structures and Installations
System wiring
Note:
-
T above distance is measured in a spacious(no obstacle) environment,
Please refer to the actual test distance before installation. -
Users must use the Tuya ZigBee gateway to realize remote control and voice control.
Wiring Diagram
For single color
Dimming remote
Press and hold the match/set key for 8s, until the RUN LED indicator turns
white, then release, the controller will become DIM type, then do smart con
tuya APP, or short press the match key to match with dimming RF remote.
For dual-color CCT
CCT remote
Press and hold match/set key for 10s, until the RUN LED indicator turn yellow,
then release, the controller will become CCT type, then do smart con tuya APP,
or short press the match key to match with the CCT RF remote.
Note:
- Users can connect a constant voltage power supply or power adapter as power input.
- Press and hold the Match/Set key for 2s, and switch 2 kinds of light type in sequence.
- Switch off the power, then switch on the power, and repeat again. Immediately short-press the match key 3 times, and the light on/off time will change between 3s and 0.5s.
- For CCT light, continuous power on and off will change 3 levels of color temperature (WW, NW, and CW) in sequence.
Push Dim
DIM
Single color| Click| ON/OFF
---|---|---
Double Click| Turn on at 100% or 10%(night light) and vice-versa
Long press(>1s) from OFF| Dimming UP/DOWN
Long press(>1s) from ON| Dimming UP/DOWN
CCT
Dual Color| Click| ON/OFF
Double Click| Turn on at 100% or 1 0%(night light) and vice-versa
Long press(> 1 s) from OFF| Color temperature UP/DOWN (turn off and turn on to
return dimming)
Long press(>1s) from ON| Dimming UP/DOWN
Tuya APP network connection
Press and hold the Match/Set key for 5s, or push twice the Match/Set key
fastly, or when press and hold the Match/Set key for 8 or to set 2 kinds of
light types:
Clear the previous network connection, enter config mode, the purple LED
indicator fast flashes, and the output LED will flash 10 times.
If the Tuya APP network connection succeeds, the RUN LED indicator will stop
flashing purple, and turn the corresponding light type color (White: DIM,
Yellow: CCT.
and in Tuya APP, you can find ZB-DIM or ZB-CCT device
Press and hold the Match/Set key for 2s:
Switch 2 kinds of light type in sequence, notice this operation does not
automatically clear the previous network connection.
Repeat power on and off 5 consecutive times, also clear the previous network
connection, and enter config mode, and the output LED will flash 10 times.
Tuya APP interface
DIM:
Touch the brightness slider to adjust brightness.
CCT:
Touch the color wheel to adjust the color temperature.
Touch the brightness slider to adjust brightness.
WZ1 match remote control (Optional)
End users can choose suitable match/delete ways. Two options are offered for selection:
Use the WZ1’s Match key
Match:
Short press the match key of WZ1, and immediately press the on/off key (single
zone remote)
or zone key (multiple zones remote) on the remote.
The LED indicator fast flash a few times means the match is successful.
Delete:
Press and hold the match key of WZ1 for 15s to delete all matches,
The LED indicator fast flash a few times means all matched remotes were
deleted.
Use Power Restart
Match:
Switch off the power of WZ1, then switch on the power, and repeat again.
An immediately short press on/off key (single zone remote) or zone key
(multiple zones remote) 3 times on the remote.
The light blinks 3 times means the match is successful.
Delete:
Switch off the power of WZ1, then switch on the power, and repeat again.
An immediately short press on/off key (single zone remote) or zone key
(multiple zones remote) 5 times on the remote.
The light blinks 5 times means all matched remotes were deleted.
WZ1 works as a ZigBee-RF converter to match RF LED controller or dimming
driver
The end users can choose suitable match/delete ways. Two options are offered for selection:
Use the controller’s Match key
Match:
Short press the match key of the controller, and immediately press the on/off
key on the Tuya APP.
The LED indicator fast flash a few times means the match is successful.
Delete:
Press and hold the match key of the controller for 5s, The LED indicator fast
flash a few times means the match was deleted.
Use Power Restart
Match:
Switch off the power of the controller, then switch on the power, and repeat
again.
An immediately short press on/off key 3 times on the Tuya APP.
The light blinks 3 times means the match is successful.
Delete:
Switch off the power of the controller, then switch on the power, and repeat
again.
Immediately short press the on/off key 5 times on the Tuya APP.
The light blinks 5 times means the match was deleted.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>