SKYDANCE T11 Wall Mounted Touch Panel User Manual

: June 2, 2024
: SKYDANCE

T11 Wall Mounted Touch Panel

Wall Mounted Touch Panel

Model No.: T11(IT), T12(IT), T13(IT), T14(IT)
4 Zone/1-4 color/Glass touch panel/Color wheel/AC input/DMX 512 and RF 2.4G signal output

touch panel

Features

Touch panel 4 zone 1-4 color DMX512 master, can also be used as 4 zone 1-4 color RF remote.
DMX signal output, comply to standard DMX512 protocol, compatible with DMX decoder from any supplier.
When used as RF remote, each zone can remote control multiple Skydance’s 2.4G LED controllers.
Ultra sensitive high strength glass touch panel with touch color wheel in the middle.
Smooth and accurate color adjustment by touching the color wheel.
Touch keys with chord tones and LED indicator.
White & Black glass panel available.

Technical Parameters

Model No.	T11(IT)	T12(IT)	T13(IT)	T14(IT)
Light type	Single color	Dual color	RGB	RGBW
Output DMX channel number	4	8	12	16

Input and Output

Input voltage| 100-240VAC
Input current| Max 0.1A
Output signal|

DMX512, RF 2.4GHz

Safety and EMC

EMC standard (EMC)|

ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4

Safety standard(LVD)|

EN 62368-1:2020+A11:2020

Radio Equipment(RED)|

ETSI EN 300 328 V2.2.2

Certification|

CE,EMC,LVD,RED

Dimming data

Input signal|

Touch key + RF 2.4GHz

RF Control distance|

10m(Barrier-free space)

Dimming level| 256 levels
Dimming range| 0 -100%

Operation temperature

|
---|---
Case temperature (Max.)|

Ta: -30 OC ~ +55 OC

Environment| T c: +65OC
IP rating| IP20
Warranty

Warranty| 5 years

Mechanical Structures and Installations

dmx

Installation diagram:

installation parts

Typical base as below:

Key function

T11(IT) Single color panel

Short press turn on zone light and select zone simultaneously, long press 2s turn off zone light.
Short press multiple zone key fastly, will select multiple zone synchronously.
4 zone control separately or synchronously, each zone could control multiple receivers.

T12(IT) Dual color panel

Short press turn on zone light and select zone simultaneously, long press 2s turn off zone light.
Short press multiple zone key fastly, will select multiple zone synchronously.
4 zone control separately or synchronously, each zone could control multiple receivers.

T13(IT) RGB panel

rgb panel

Short press turn on zone light and select zone simultaneously, long press 2s turn off zone light.
Short press multiple zone key fastly, will select multiple zone synchronously.
4 zone control seperately or synchronously, each zone could control multiple receivers.

T14(IT) RGBW panel

Short press turn on zone light and select zone simultaneously, long press 2s turn off zone light.
Short press multiple zone key fastly, will select multiple zone synchronously.
4 zone control seperately or synchronously, each zone could control multiple receivers.

Touch Panel work as DMX512 master match RF remote

Touch panel 4 zone DMX512 master can also match with 4 zone RF remote (Optional).
End user can choose the suitable match/delete ways. Two options are offered for selection:

Use On/Off key
Match:
Turn on light, turn off, immediately press the On/Off
key of the panel for 5s,
then press any zone key of the RF remote within 5s.
The LED indicator fast flash 3 times
means match is successful.

Delete:
Turn on light, turn off, immediately press the On/Off
key of the panel for 10s to delete all match,
The LED indicator fast flash 6 times
means all matched remotes were deleted.

Use Power Restart
Match:
Switch off the power of the panel, then switch on power,
repeat again.
immediately short press any zone key 3 times on the remote.
The LED indicator fast flash 3 times
means match is successful.

Delete:
Switch off the power of the panel, then switch on power,
repeat again.
Immediately short press any zone key 5 times on the remote.
The LED indicator fast flash 6 times
means all matched remotes were deleted.

Touch Panel work as RF remote

Touch panel 4 zone remote can match with RF controller for the corresponding light type.
End user can choose the suitable match/delete ways. Two options are offered for selection:

Use the controller’s Match key
Match:
Short press match key, immediately press zone
key of the touch panel.
The LED indicator fast flash a few times
means match is successful.

Delete:
Press and hold match key for 5s to delete all match,
The LED indicator fast flash a few times
means all matched remotes were deleted.

Use Power Restart
Match:
Switch off the power of the receiver, then switch on power,
repeat again.
Immediately short press zone key 3 times on the touch panel.
The light blinks 3 times means match is successful.
.
Delete:
Switch off the power of the receiver, then switch on power,
repeat again.
Immediately short press zone key 5 times on the touch panel.
The light blinks 5 times means all matched remotes were deleted.

The address assignment of touch panel work as DMX512 master

After connect with DMX decoders, please set the DMX decoders address as below:

Model No.

|

T11(IT)

| T12(IT)| T13(IT)| T14(IT)
---|---|---|---|---
WW CW| R G B| R G B W
Zone 1 DMX decoder’s address| 1| 1 2| 1 2 3| 1 2 3 4
Zone 2 DMX decoder’s address| 2| 3 4| 4 5 6| 5 6 7 8
Zone 3 DMX decoder’s address| 3| 5 6| 7 8 9| 9 10 11 12
Zone 4 DMX decoder’s address| 4| 7 8| 10 11 12| 13 14 15 16