SKYDANCE V5-M 5 Channel RGB+CCT LED RF Controller User Guide

June 3, 2024
SKYDANCE

skydance-logo

SKYDANCE V5-M 5 Channel RGB+CCT LED RF Controller

skydance-logo

Channel RGB+CCT LED RF Controller

Model No.: V5-M 5 Channels/DC power socket input/Step-less dimming/Wireless remote control/Auto-transmitting/Synchronize

Features

  • DC power socket input and 5 channel constant voltage output.
  • Match with RF 2.4G single zone or multiple zone RGB+CCT remote control.
  • One RF controller accept up to 10 remote control.
  • 4096 levels 0-100% dimming smoothly without any flash.
  • Built in 10 dynamic mode, include jump or gradual change style.
  • Auto-transmitting function: Controller automatically transmit signal to another controller with 30m control distance.
  • Synchronize on multiple number of controllers.
  • Light on/off fade time 3s selectable.

Technical Parameters

Input and Output

Input voltage| 12-24VDC
Input current| 15.5A
Output voltage| 5 x (12-24)VDC
Output current| 5CH,3A/CH
Output power| 5 x (36-72)W
Output type| Constant voltage
Dimming data

Input signal| RF 2.4GHz
Control distance| 30m(Barrier-free space)
Dimming gray scale| 4096 (2^12) levels
Dimming range| 0 -100%
Dimming curve| Logarithmic
PWM Frequency| 1000Hz (default)
Safety and EMC

EMC standard (EMC)| ETSI EN 301 489-1 V2.2.3

ETSI EN 301 489-17 V3.2.4

Safety standard(LVD)| EN 62368-1:2020+A11:2020
Radio Equipment(RED)| ETSI EN 300 328 V2.2.2
Certification| CE,EMC,LVD,RED
Environment

Operation temperature| Ta: -30 OC ~ +55 OC
Case temperature (Max.)| T c: +85OC
IP rating| IP20
Warranty and Protection

Warranty| 5 years
Protection| Reverse Polarity

Short circuit

Mechanical Structures and Installations

SKYDANCE-V5-M-5-Channel-RGB+CCT-LED-RF-Controller-
fig-2

Wiring Diagram

  • Connect constant voltage power supplySKYDANCE-V5-M-5-Channel-RGB+CCT-LED-RF-Controller-fig-3
  • Connect power adapterSKYDANCE-V5-M-5-Channel-RGB+CCT-LED-RF-Controller-fig-4

Note: Long press match key tor 10s, RGB and CCT light can not be on at the same time. Long press match key tor 15s, RGB and CCT light can be on at the same time. above operation will also restore the factory seting.

Match Remote Control (two match ways)

End user can choose the suitable match/delete ways. Two options are offered for selection:

Use the controller’s Match key

Match:
Short press match key, immediately press on/off key (single zone remote) or zone key (multiple zone remote) on the remote. The LED indicator fast flash a few times means match is successful.

Delete:
Press and hold match key for 5s to delete all match, The LED indicator fast flash a few times means all matched remotes were deleted.

Application notes

  1. All the receivers in the same zone.

Use Power Restart

Match:
Switch off the power of the receiver, then switch on power. Repeat again. Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 3 times on the remote. The light blinks 3 times means match is successful.

Delete:
.Switch off the power of the receiver, then switch on power. Repeat again. Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 5 times on the remote. The light blinks 5 times means all matched remotes were deleted.SKYDANCE-V5-M-5-Channel-RGB+CCT-LED-RF-Controller-
fig-5

RF remote

Auto-transmitting: One receiver can transmit the signals from the remote to another receiver within 30m, as long as there is a receiver within 30m, the remote control distance can be extended.
Auto-synchronization: Multiple receivers within 30m distance can work synchronously when they are controlled by the same remote, under same dynamic mode and with same speed. Receiver placement may offer up to 30m communication distance. Metals and other metal materials will reduce the range. Strong signal sources such as WiFi routers and microwave ovens will affect the range. We recommend for indoor applications that receiver placements should be no further apart than15m.

**Each receiver(one or more) in a different zone, like zone 1, 2, 3 or

4.SKYDANCE-V5-M-5-Channel-RGB+CCT-LED-RF-Controller-
fig-6** Light on/off fade time

Long press match key 5s, then short press match key 3 times, the light on/off time will be set to 3s, the indicator light blink 3 times. Long press match key 10s, restore factory default parameter, the light on/off time also restore to 0.5s.

Dynamic mode list

No. Name No. Name
1 RGB jump 6 RGB fade in and out
2 RGB smooth 7 Red fade in and out
3 6 color jump 8 Green fade in and out
4 6 color smooth 9 Blue fade in and out
5 Color temperature smooth 10 White fade in and out

Dual color control

  • CH4=Warm white LED
  • CH5=Cool white LED
  • Each channel can supply up to 72W(@24V) and white balance can be controlled as such:SKYDANCE-V5-M-5-Channel-RGB+CCT-LED-RF-Controller-fig-7

Malfunctions analysis & troubleshooting

Malfunctions Causes Troubleshooting

No light

| 1.  No power.

2.  Wrong connection or insecure.

| 1.  Check the power.

2.  Check the connection.

Wrong color| 1. Wrong connection of R/G/B/WW/CW wires.| 1. Reconnect R/G/B/WW/CW wires.
Uneven intensity between front and rear,with voltage drop| 1. Output cable is too long.

2. Wire diameter is too small.

3. Overload beyond power supply capability.

4. Overload beyond controller capability.

| 1. Reduce cable or loop supply.

2. Change wider wire.

3. Replace higher power supply.

4. Add power repeater.

No response from the remote| 1. The battery has no power.

2. Beyond controllable distance.

3. The controller did not match the remote.

| 1. Replace battery.

2. Reduce remote distance.

3. Re-match the remote.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals