SKYDANCE T1-K Wall Mounted Rotary Panel User Manual

SKYDANCE T1-K Wall Mounted Rotary Panel

Model No: T1-K, T2-K, T3-K

1-3 color/Glass panel/Rotary dimming/DC input/3 channel constant voltage PWM output/Wireless remote control

Features

• Rotary panel single color, dual color or RGB PWM constant voltage controller.
• Rotate knob to change RGB color, color temperature or brightness.
• 256 levels 0-100% dimming smoothly without any flash.
• Compatibility with RF 2.4G single zone or multiple zone remote control.
• PWM frequency 2KHz or 8KHz selectable.
• Push/Rotate with LED indicator.
• White & Black glass panel available.

Technical Parameters

Input and Output|
---|---
Model No.| T1-K| T2-K| T3-K
Input voltage| 12-48VDC| 12-48VDC| 12-48VDC
Input current| 12.5A| 10.5A| 12.5A
Output voltage| 3 x (12-48)VDC| 2 x (12-48)VDC| 3 x (12-48)VDC
Output current| 3CH,4A/CH| 2CH,5A/CH| 3CH,4A/CH
Output power| 3 x (48-192)W| 2 x (60-240)W| 3 x (48-192)W
Output type| Constant voltage| Constant voltage| Constant voltage
PWM frequency| 2K/8KHz| 2K/8KHz| 2K/8KHz
Light type| Single color| Dual color| RGB
Safety and EMC

EMC standard (EMC)

| ETSI EN 301 489-1 V2.2.3

ETSI EN 301 489-17 V3.2.4

Safety standard(LVD)| EN 62368-1:2020+A11:2020
Radio Equipment(RED)| ETSI EN 300 328 V2.2.2
Certification| CE,EMC,LVD,RED
Environment
Operation temperature| Ta: -30 OC ~ +55 OC
Case temperature (Max.)| Ta: +85 OC
Package|
Size| L112 x W112 x H60mm
Gross weight| 0.220kg

Mechanical Structures and Installations

Typical base as below

• European style
• 86 size

Installation diagram

Match Remote Control (two match ways)

The rotary panel controller can also match with the RF remote (optional). The end users can choose suitable match/delete ways. Two options are offered for selection:

Use Knob

Match

Turn on light, turn off, immediately push the knob for 5s, then press on/off key (single zone remote) or zone key (multiple zone remote) of the RF remote with in 5s. The LED indicator fast flash 3 times means match is successful.

Delete

• Turn on light, turn off, immediately push the knob for 10s, delete all matched RF remote.
• The LED indicator fast flash 6 times means all matched remotes were deleted.

Use Power Restart

Match

Switch off the power, then switch on power, repeat again, and immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 3 times on the remote. The light blinks 3 times means match is successful.

Delete

Switch off the power, then switch on power, repeat again, immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 5 times on the remote. The light blinks 5 times means all matched remotes were deleted.

Knob function

T1-K Single color dimmer

• Push: Turn on or off light.
  • After turn on light:
• Rotate: Rotate knob to adjust brightness (2.5 turns, 50 levels).
• Long push(1-6s): Continuous 256 levels of brightness adjustment.

T2-K Dual color temperature

• Push: Turn on or off light.
  • After turn on light:
• Rotate: Rotate knob to change color temperature or brightness (2.5 turns, 50 levels).
• Push twice: Switch between color temperature or brightness adjustment.
• Long push(1-6s): Continuous 256 levels brightness adjustment.

T3-K RGB

• Push: Turn on or off light.
  • After turn on light:
• Rotate: Rotate knob to change RGB color (3 turns, 60 colors) or brightness (2.5 turns, 50 levels).
• Push twice: Switch between RGB color or brightness adjustment.
• Long push(1-6s): Continuous 256 levels saturation or brightness adjustment.

Wiring diagram

T1-K

T2-K

T3-K

PWM frequency setting

• We can select 2KHz or 8KHz PWM frequency by one DIP switch.
• Higher PWM frequency, will cause lower output current, higher power noise, but more suitable for camera(No flickers for video).

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>